missmelliss01 Posted June 6, 2020 Share Posted June 6, 2020 Yes, I sure will tomorrow. Thank you! I clicked on the newest 874 apk but it stated it was only a 15 day trial. Does the license in my installed paid app follow into the new version if I just install it over it? Thank you for your quick reply and I'll be sure to upload a pic tomorrow Link to comment Share on other sites More sharing options...
andrewilley Posted June 6, 2020 Share Posted June 6, 2020 31 minutes ago, missmelliss01 said: I clicked on the newest 874 apk but it stated it was only a 15 day trial. Poweramp is always a time-limited trial version, unless you have paid for a license to unlock it. Here's what the website download link says. Note the last sentence: Andre Link to comment Share on other sites More sharing options...
missmelliss01 Posted June 6, 2020 Share Posted June 6, 2020 yes but I purchased the V3 870 version and I have the license for that. My question earlier is if you also have to purchase the updates. So, If I want to download the latest version, 875... do I have to pay again or will by current license for 870 transfer over to the new version? If so, do I just install over my current 870 version I purchased? Link to comment Share on other sites More sharing options...
andrewilley Posted June 6, 2020 Share Posted June 6, 2020 4 hours ago, missmelliss01 said: do I have to pay again or will by current license for 870 transfer over to the new version? If so, do I just install over my current 870 version I purchased? As I said before (twice), once you have purchased a license, all updates are free. Just download and install the newer APKs. Andxre Link to comment Share on other sites More sharing options...
missmelliss01 Posted June 7, 2020 Share Posted June 7, 2020 Ok thanks. Sorry I guess I misunderstood the last comment. Appreciate it 😉 Link to comment Share on other sites More sharing options...
redlith Posted June 9, 2020 Share Posted June 9, 2020 I encounter some minor issue.. hope i describe it well.. for you to mock it. Im using Poweramp v874 play version,arm64,my handset unit is Asus Zenfone 5z,Java base output using bluetooth speaker,duck volume is ON. When volume is at 30% or lower, duck volume acts weird when their is incoming system sound notification the volume suddenly amplified so its much louder ,supposedly,if duck volume is ON it must be slightly lowered than the defined volume when there is any incoming sound from notification,also the musixmatch doenst show its floating lyrics unlike in <P A 871 version musicmatch does behave well. In PA 873, volume ducking works well at any defined volume either 10%,30%~100%. Link to comment Share on other sites More sharing options...
NickIst Posted June 10, 2020 Share Posted June 10, 2020 At last thanks for multiple composers. However it seems that separating two entries via Poweramp isn't working properly it creates a new entry like "Composer A; Composer B". Though it's not a big issue, because I've all tag editted on the pc and no PA reads them properly. Link to comment Share on other sites More sharing options...
andrewilley Posted June 10, 2020 Share Posted June 10, 2020 1 hour ago, NickIst said: At last thanks for multiple composers. I didn't know Max had implemented that. Maybe you mean reading Vorbis multiple tags from FLAC files? If so, perhaps that is now working in order to pull the data in, but not to handle them as separate items within the main app yet? Andre Link to comment Share on other sites More sharing options...
maxmp Posted June 10, 2020 Author Share Posted June 10, 2020 @redlith interesting, there were no any changes to volume code and related, and I can't reproduce it. I would suggest unpairing and re-pairing the device again, esp. if the issue is not reproducible for non-BT case. Link to comment Share on other sites More sharing options...
redlith Posted June 16, 2020 Share Posted June 16, 2020 On 6/11/2020 at 3:41 AM, maxmp said: @redlith interesting, there were no any changes to volume code and related, and I can't reproduce it. I would suggest unpairing and re-pairing the device again, esp. if the issue is not reproducible for non-BT case. Correcting , sorry not in incoming notification tone.. I'm using google messages and "hear outgoing message sound" is switched "on". When the volume is at 30% or lower, outgoing message tone seems to override the volume mechanism of PA which this app acts temporary volume intonation (sudden volume amplification) for about 1second. Only occurs in version 874.. gonna try 875 n' see if this reccuring. Link to comment Share on other sites More sharing options...
GL_2020 Posted June 20, 2020 Share Posted June 20, 2020 Good evening, I have a question regarding volume controls. I am using wired headphones on a Samsung S10 mobile. When adjusting the volume both up or down, the volume drops to about 20% for a few seconds then back to the adjusted level. How can I correct this please? Link to comment Share on other sites More sharing options...
MotleyG Posted June 20, 2020 Share Posted June 20, 2020 2 hours ago, GL_2020 said: Good evening, I have a question regarding volume controls. I am using wired headphones on a Samsung S10 mobile. When adjusting the volume both up or down, the volume drops to about 20% for a few seconds then back to the adjusted level. How can I correct this please? Check this setting; Settings>Headset/Bluetooth>Beep If you are using the volume from the headphones this causes a short beep, but it may be muted. Link to comment Share on other sites More sharing options...
GL_2020 Posted June 20, 2020 Share Posted June 20, 2020 That didn't work Please note that I have DVC enabled. When turning DVC off, the problem doesn't occur but would like to keep it enabled if possible Link to comment Share on other sites More sharing options...
sagely Posted July 9, 2020 Share Posted July 9, 2020 For the past 3 days or so, Poweramp won't recognize my library on SD card. It lets me choose my root music folder and then I have to 'select folders' to close the screen. It still shows 0 songs/0 folders. Restarted. Added Google Files app based on the FAQ section. Other music players see/use the music library fine. Not sure what to do next. Any help would be appreciated. Thank you! Link to comment Share on other sites More sharing options...
andrewilley Posted July 9, 2020 Share Posted July 9, 2020 2 hours ago, sagely said: For the past 3 days or so, Poweramp won't recognize my library on SD card. Has there been an Android update on your system recently? Is it possible an update broke the master file access permissions (in Android settings for the app)? Have you tried a Full Rescan? Does the folder that you selected still have a tickmark against it if you go back into the Music Folders screen? Andre Link to comment Share on other sites More sharing options...
sagely Posted July 9, 2020 Share Posted July 9, 2020 Thanks Andre. There was an update recently, but it shows that Poweramp has storage permission. Are there any other permissions I should be looking for? The tickbox is always empty when I reopen the Folders Selection. Doing a full rescan and reselecting the music folder doesn't work. Many thanks, S Link to comment Share on other sites More sharing options...
andrewilley Posted July 9, 2020 Share Posted July 9, 2020 @sagely What Android version are you now on? It might be worth doing a clean install (or clear app data). Andre Link to comment Share on other sites More sharing options...
sagely Posted July 10, 2020 Share Posted July 10, 2020 Clearing the app data seems to have worked! Thank you! Link to comment Share on other sites More sharing options...
john hit Posted September 20, 2020 Share Posted September 20, 2020 I tried installing it on samsung s9 plus they say app not install, why ? But when I install old version like 790 ,it works but the new version i can't install and my android version is 10. One 2.1 UI Link to comment Share on other sites More sharing options...
andrewilley Posted September 20, 2020 Share Posted September 20, 2020 6 minutes ago, john hit said: I tried installing it on samsung s9 plus they say app not install, why ? But when I install old version like 790 ,it works but the new version i can't install Try uninstalling the old version first. Best to use the Play Store version if you can (currently build 882, https://play.google.com/store/apps/details?id=com.maxmpz.audioplayer), or if that does not work try latest download from here on the website (883, https://forum.powerampapp.com/files/file/70-poweramp-v3-build-883-uniapk/ ). Andre Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.