swingzwh Posted January 26, 2019 Share Posted January 26, 2019 Do you think it's very sensitive to adjust the volume here? As long as you adjust the volume, there will always be sudden loud, sudden low voice, because adjusting the volume here as long as a slight movement will jump 3-5%, or more, it is difficult to fine-tune, adjusting the volume size is also a very common function, as long as you open the player, you will certainly adjust the volume, here is a small suggestion, can you add buttons in these two very blank positions, or If you add the induction area to the blank position on both sides, the volume will be reduced by 1% by clicking on the left, 1% by clicking on the right, and the volume will be slowly increased or decreased by 1% by long pressing. Please consider adding this practical function as soon as possible. Link to comment Share on other sites More sharing options...
blaubär Posted January 26, 2019 Share Posted January 26, 2019 1 hour ago, swingzwh said: As long as you adjust the volume, there will always be sudden loud, sudden low voice, because adjusting the volume here as long as a slight movement will jump 3-5%, or more, it is difficult to fine-tune You can increase the number of volume levels, thereby decreasing the step size Link to comment Share on other sites More sharing options...
maxmp Posted January 26, 2019 Share Posted January 26, 2019 Right, that big volume knob still affected by (default on many devices) 16 levels of volume, so jumps will happen. Link to comment Share on other sites More sharing options...
andrewilley Posted January 26, 2019 Share Posted January 26, 2019 To be honest - and this is the first time I really thought about it as I mainly use the EQ anyway - rotary controls (designed to emulate the look and feel of physical devices) don't really make much sense in a touch-screen world. They are hard to adjust with precision and difficult to see how far the adjustment can be tweaked. Sliders would probably be far more usable. Andre Link to comment Share on other sites More sharing options...
swingzwh Posted January 26, 2019 Author Share Posted January 26, 2019 2 hours ago, maxmp said: Right, that big volume knob still affected by (default on many devices) 16 levels of volume, so jumps will happen. Max, can you add a button or sensing area that increases or decreases the volume of the voice when the volume is so large on the left and right sides? Now it's really hard for that round wheel to adjust the volume to a certain volume! Link to comment Share on other sites More sharing options...
swingzwh Posted January 26, 2019 Author Share Posted January 26, 2019 4 hours ago, blaubär said: You can increase the number of volume levels, thereby decreasing the step size Setting up 100, but the volume adjustment of the round wheel is still difficult to fine-tune to a certain volume. We hope to consider adding a small button or sensing area to increase the volume and reduce the volume in the blank position on both sides of the round wheel. Link to comment Share on other sites More sharing options...
blaubär Posted January 26, 2019 Share Posted January 26, 2019 Would it be possible to gear the existing rotary controls ? As they are currently implemented a rotation span of about 300 degrees covers the complete range from 0% to 100%. Why not give it let's say 2 turns / 720 degrees ? One would have to remove the marker on the knob of course, because its position wouldn't unambiguosly indicate the active value. But this is displayed numerically below, so not much harm done. Alternatively one could decouple the speed of turning and displaying to keep the marker as display. Provided the controls are able to do that 😀 Link to comment Share on other sites More sharing options...
swingzwh Posted January 27, 2019 Author Share Posted January 27, 2019 14 hours ago, blaubär said: Would it be possible to gear the existing rotary controls ? As they are currently implemented a rotation span of about 300 degrees covers the complete range from 0% to 100%. Why not give it let's say 2 turns / 720 degrees ? One would have to remove the marker on the knob of course, because its position wouldn't unambiguosly indicate the active value. But this is displayed numerically below, so not much harm done. Alternatively one could decouple the speed of turning and displaying to keep the marker as display. Provided the controls are able to do that 😀 Right, or add a button (+, -) to the right and left sides of the volume wheel directly. This should be the simplest solution. Now the round wheel is too sensitive to be easy to fine-tune. Link to comment Share on other sites More sharing options...
blaubär Posted January 27, 2019 Share Posted January 27, 2019 6 hours ago, swingzwh said: Right, or add a button (+, -) to the right and left sides of the volume wheel directly. This should be the simplest solution. Now the round wheel is too sensitive to be easy to fine-tune. If we want to apply this to the master volume control alone then you're right. If we want to make the rotary controls generally less sensitive then that won't do. Link to comment Share on other sites More sharing options...
swingzwh Posted January 27, 2019 Author Share Posted January 27, 2019 28 minutes ago, blaubär said: If we want to apply this to the master volume control alone then you're right. If we want to make the rotary controls generally less sensitive then that won't do. I hope to join (+, -) as soon as possible. Thanks! Link to comment Share on other sites More sharing options...
Urchin Posted January 28, 2019 Share Posted January 28, 2019 I think the + and - buttons idea is a good one. It would certainly be easier to use for those who are having any trouble with it. Since it would be adding buttons in blank spots, I don't see the harm. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.