Requests for Hi-Res Support (please state which build of Poweramp you are using)

[maxmp]

@germanloco it doesn’t seem to support it for 3.5 (https://m.gsmarena.com/motorola_moto_g42-11608.php), but it may work for Bluetooth+LDAC/LDHC and USB DACs.

[germanloco]

23 hours ago, maxmp said:

@germanloco it doesn’t seem to support it for 3.5 (https://m.gsmarena.com/motorola_moto_g42-11608.php), but it may work for Bluetooth+LDAC/LDHC and USB DACs.

Ok! Thanks for answer 

[Lex T]

1. Device: Asus ROG Phone 7

2. ROM version Global Stock Android 13, build WW_33.0820.0810.121 +adb shell getprop output

3. Information from Asus.com: Audio Output: Hi-Res Audio up to 384 kHz / 32-bit for 3.5mm output Qualcomm WCD9385 for Hi-Res output

4. attached

5. attached

thank`s devs for best player

adb shell getprop.txt audio_policy_configuration.xml

[Rachidulric]

Galaxy A54. Hi-Res doesn't work and always defaults to 44.1KHz no matter what setting I tweak. 

Latest September Patch, Android 13. 

[Rachidulric]

Galaxy A54 5G, latest firmware (October 2023). Log : 

14:19:02.103 build-976-bundle-play
Device: samsung samsung SM-A546E a54xnsxx s5e8835 "s5e8835" a54x TP1A.220624.014.A546EXXS5AWJ1 [arm64-v8a, armeabi-v7a, armeabi]

samsung band
FLAG_VARIANT_SAMSUNG_UHQA
2 changelist=27100863
USB can handle Hi-Res - sdk=33
>>>OK flags=0x11671c400000000
FLAG_VARIANT_SAMSUNG_UHQA
FLAG_SUPPORTS_PCM_24
FLAG_SUPPORTS_PCM_32
FLAG_SUPPORTS_USB
FLAG_NEEDS_EXTRA_SLEEPS
FLAG_SUPPORTS_SPEAKER
FLAG_OUT_PARAMS_UNDETECTABLE
FLAG_SUPPORTS_LDAC
FLAG_ALLOW_DVC_EFFECT
FLAG_BT_DVC_EFFECT
FLAG_STOP_FOR_PAUSE
INTERNAL_OUTPUT_FLAG_SR_384K
INTERNAL_OUTPUT_FLAG_SR_352K
INTERNAL_OUTPUT_FLAG_SR_192K
INTERNAL_OUTPUT_FLAG_SR_176K
INTERNAL_OUTPUT_FLAG_SR_96K
INTERNAL_OUTPUT_FLAG_SR_88K
 

It seems to be supporting up to 384K, however, it's stuck to 16 bit 48Khz even with the official Samsung USB-C to 3.5mm Headphone adapter. USB-C headphones can push 24 Bit/48Khz tho so this is weird. Is it from their side?

[andrewilley]

45 minutes ago, Rachidulric said:

It seems to be supporting up to 384K, however, it's stuck to 16 bit 48Khz even with the official Samsung USB-C to 3.5mm Headphone adapter.

I tried the official Samsung adapter cable on my Galaxy A54 and it was rubbish. Not only did it have a nasty low-level electronic hiss, it couldn't cope with very low volume levels (kept clipping and dropping in and out). I seem to recall high-res didn't work well either, but I sent it back so I can't test it again now. High-res seems very much dependent on the DAC adapter in use (even if the spec says it should work).

I've recently received a CS46L41-based cable (this one) which was cheaper than the Samsung cable at the time and it sounds so much better all round - and it can go up to 384k/32-bit, and works fine with DVC enabled. Sadly for me, the Android 3-button inline controls on my headset cable (play/pause/etc, volume) don't seem to work via it on the A54 (SM-A546B, latest firmware).  I also tested on an A40, A70, S21, and an Asus tablet, and they all worked fine for all three buttons, so clearly there is some compatibility issue with the A54. But if you're not bothered about the cable buttons though, give it a try.

Andre

[Ska77]

Hello.  The one ui 6 shell (android14) has been updated, the hi res output gives an error.

Version Info ======================
Build: Poweramp build-977-uni full verified cached
Store: Play
Unlocker: build-305
Arch: 64
Skin: ActivityTheme_White
Device: samsung SM-A536E s5e8825 a53x a53xnsxx [arm64-v8a, armeabi-v7a, armeabi]
Installer: com.sec.android.app.samsungapps (4.5.65.1)
Android: 14 samsung/a53xnsxx/a53x:14/UP1A.231005.007/A536EXXU7DWK6:user/release-keys ru_RU

[andrewilley]

@Ska77 I have the same issue on my A54 which has just been updated to OneUI 6.0, Android 14. It doesn't seem to be happening on high-end Samsung devices though - Max has been able to test on recently updated S22 and Flip4 phones which seem to be working fine with the Samsung USB-C>3.5mm adapter. What output device are you using on your A53 when this error occurs?

The solution for now is to switch to AAudio output rather than using the experimental Hi-Res option. That should still provide at least 192kHz/24-bit playback on a decent USB DAC.

Andre

[Ska77]

39 минут назад, Андревилли сказал:

@Ska77У меня такая же проблема на моем A54, который только что обновился до OneUI 6.0, Android 14. Однако, похоже, этого не происходит на устройствах Samsung высокого класса — Макс смог протестовать на недавно обновленных телефонах S22 и Flip4, которые, кажется, работают нормально с адаптером Samsung USB-C>3,5 мм. Какое устройство вы используете на своем A53, когда возникает эта ошибка?

На данный момент решение состоит в том, чтобы переключиться на выход AAudio и не использовать экспериментальную опцию Hi-Res. Это по-прежнему должно обеспечивать качество звука как минимум 192 кГц/24 бита на приличном USB-ЦАП.

Андре

This error occurs on the speaker and on Bluetooth and on the usb DAC when you connect via hi-res audio input.  The adapter is like this.

[andrewilley]

10 minutes ago, Ska77 said:

This error occurs on the speaker and on Bluetooth and on the usb DAC when you connect via hi-res audio input.  The adapter is like this.

Thanks. Please use AAudio output in the meantime.

My USB-C DAC is very similar to yours, I don't think the model is particularly significant to this issue, this is a Samsung firmware problem. These type of adapters mostly come from China, based on fairly standard chipsets. Mine is Conexant CX31993 based, but there are quite a few based on the Cirrus CS46L41 too, and presumably others too.

Andre