Mark Lee Posted February 6, 2022 Share Posted February 6, 2022 My tablet has Dolby Atmos, when using Poweramp should this be on or off, does it pass through it or bypass it. Link to comment Share on other sites More sharing options...
andrewilley Posted February 6, 2022 Share Posted February 6, 2022 You keep asking about what is the cleanest way to pass audio directly to your listening device, so I'd suggest turning any additional manufacturer-added processing (such as Dolby Atmos) off. Disabling MusicFX in the second EQ screen is a good idea. Andre Link to comment Share on other sites More sharing options...
Mark Lee Posted February 6, 2022 Author Share Posted February 6, 2022 What's musicfx? Link to comment Share on other sites More sharing options...
Mark Lee Posted February 6, 2022 Author Share Posted February 6, 2022 Found it and it was already off. Link to comment Share on other sites More sharing options...
░▒▓█ クリス █▓▒░ Posted February 7, 2022 Share Posted February 7, 2022 On 2/6/2022 at 12:45 PM, andrewilley said: You keep asking about what is the cleanest way to pass audio directly to your listening device, so I'd suggest turning any additional manufacturer-added processing (such as Dolby Atmos) off. Disabling MusicFX in the second EQ screen is a good idea. Andre it shouldn't matter when DVC is on, right? 🤔 Link to comment Share on other sites More sharing options...
MotleyG Posted February 7, 2022 Share Posted February 7, 2022 2 hours ago, ░▒▓█ クリス █▓▒░ said: it shouldn't matter when DVC is on, right? 🤔 Tone and EQ controls can still be used with DVC turned on. If you are looking for a flat output true to the original source you are best to leave all of these defeated. Link to comment Share on other sites More sharing options...
Mark Lee Posted February 7, 2022 Author Share Posted February 7, 2022 Does defeated mean off¿, ie eq, tone and limit¿ Link to comment Share on other sites More sharing options...
MotleyG Posted February 7, 2022 Share Posted February 7, 2022 24 minutes ago, Mark Lee said: Does defeated mean off¿, ie eq, tone and limit¿ Yes, defeated means off. Link to comment Share on other sites More sharing options...
Mark Lee Posted February 7, 2022 Author Share Posted February 7, 2022 Thanks Link to comment Share on other sites More sharing options...
MoPhoMike Posted April 13, 2022 Share Posted April 13, 2022 On 2/6/2022 at 5:45 AM, Mark Lee said: My tablet has Dolby Atmos, when using Poweramp should this be on or off, does it pass through it or bypass it. I would use either PA's EQ or Dolby, but not both. You would basically be EQ'ing an EQ which is never a good thing. At lower volumes it may not sound too bad, but your likely going to get massive distortion once you raise the volume. Your also using way more battery power with both applied because the DSP (Digital Signal Processor) and DAC (Digital-to-Analog Converter) are both working overtime to apply the EQ effects. Link to comment Share on other sites More sharing options...
Mark Lee Posted April 14, 2022 Author Share Posted April 14, 2022 Thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now