Saving track position on "hard" poweroff

[Shadow128]

Hi there,

 

another question ;-)
As described in my other thread I use Poweramp in my car android.

98% works really good, but there is ony bad thing.

 

Every time I switch off the car, the power will be directly taken from the radio. So there is everytime a "hard" poweroff.

The actual playlist and even the actual played song will be stored, but not the actual track time.

 

Is there any possibility to store the playtime (maybe every 10 seconds)?


Thanks and best regards,

Shadow128

[sorosch]

Hi,

 

i have the same problem. Here is my post:

 

http://forum.powerampapp.com/index.php?/topic/7697-when-i-disconnect-bluetooth-it-resets-the-audio-im-listening-to/

[Shadow128]

Hm, I don't know if this is the same problem?!

If I understand correctly, you connect your android smartphone with Poweramp over bluetooth with a "normal" car radio.

In my case android runs direct on the car radio, without bluetooth connection.

 

But maybe it's the same problem?
Maybe there's a possibilty to debug/make a log on this problem?

[andrewilley]

Does the Android audio unit not remain powered (although dormant / screen off) when the car is off? Otherwise, surely it would have to reboot the whole Android system each time you start the engine, which would be very time-consuming before you could use it.

Andre

[Shadow128]

Yes, there is an option to make a delay to shutdown. But this is only possible till 1 hour (in my model), and then it makes then also a hard power off.

Problem is also, that there is almost no possibilty to trigger on a system event to make a pause command with, for example, llama.

 

The startup time from the radio is ok, after starting the engine it takes ~20sec until Poweramp starts