Jump to content
Poweramp
maxmp

Requests for Hi-Res Support (please state which build of Poweramp you are using)

Recommended Posts

Hi Maxmp. Please add Hi-Res Support for Redmi Note 8 Pro (Mediatek Helio G90T SoC)

Here is my audio output detection log

 

11:51:53.558 v3-build-841-arm64-play
Device: Redmi Xiaomi Redmi Note 8 Pro begonia begonia [arm64-v8a, armeabi-v7a, armeabi]

FAILED to read=/vendor/etc/audio_output_policy.conf
FAILED to read=/vendor/etc/audio_io_policy.conf
FAILED to read=/system/etc/audio_policy.conf
reading=/vendor/etc/audio_policy.conf
has outputs_primary, sampling_rates=44100|48000|96000|192000
has outputs_primary formats=AUDIO_FORMAT_PCM_32_BIT|AUDIO_FORMAT_PCM_16_BIT
has usb
has usb outputs
has usb_device, sampling_rates=dynamic
has usb formats=dynamic
USB can handle Hi-Res - sdk=28
OK flags=0x386000400000000
FLAG_VARIANT_MTK_HD
FLAG_SUPPORTS_USB
FLAG_FORCE_DVC
FLAG_OUT_PARAMS_UNDETECTABLE
FLAG_SUPPORTS_LDAC
INTERNAL_OUTPUT_FLAG_SR_192K
INTERNAL_OUTPUT_FLAG_SR_96K
INTERNAL_OUTPUT_FLAG_SR_48K
INTERNAL_OUTPUT_FLAG_SR_44K
 

 

Share this post


Link to post
Share on other sites
On 5/22/2018 at 8:50 AM, maxmp said:

@sethnet Thanks for the configs. They are the same as P20 which is tested and which works fine with 709, I wonder why it fails for View 10. Will try to get this device on hands and test.

 

@Reiza Unfortunately, Snapdragon 4xx series has no hi-res output (not sure why Aqstic is mentioned on that page - probably there is an error as no any mention of Aqstic in 435 specs PDF). Your configs contain references for Hi-Res, but as this is custom ROM, they just cause extra resampling from hi-res back to standard res. Nevertheless thanks for the configs.

 

 

Hello my mate 10 doesn't support hi res well when I enable dvc there is no sound coming and when I disable it there is a Slight volume decrease (even when no headroom is on) and histen sound totally turns off (and when I go to histen setting sound stops even when dvc is off) I hope u can fix this:) 

Using ALP-L29 emui9.1 android 9.0

(and weirdly there are 2  audio_policy_configations I don't know why) 

One in system/vendor/etc 

One in system/vendor/etc/audio

Edit1:one more thing... When i enable 44.1 in hi res its like a tempo enables and sound becomes thinner and faster (so maybe phone tries to make it 48 again but doesn't do it well?)

Edit2:Im pretty sure this device supports 384khz

audio_policy_configuration.xml audio_effects.xml audio_policy_volumes.xml audio_policy.conf audio_policy_configuration-1.xml

Share this post


Link to post
Share on other sites

@Arian_amg check other sample rates (many Huaweis don't support frequencies > 192khz). Also for Huaweis, hi-res + DVC audio sits on the same "volume stream" as ringtones volume, so ringtone volume also affects hi-res + DVC volume (Let's hope this will be resolved in the future Huawei ROM updates).

Share this post


Link to post
Share on other sites
10 hours ago, maxmp said:

@Arian_amg check other sample rates (many Huaweis don't support frequencies > 192khz). Also for Huaweis, hi-res + DVC audio sits on the same "volume stream" as ringtones volume, so ringtone volume also affects hi-res + DVC volume (Let's hope this will be resolved in the future Huawei ROM updates).

Thanks for your replay :)

my phone is always silent thats why I couldn't figure out where is the problem 

Btw 192khz worked for me and histen is turned off(I know you can't do anything about histen to work) 

Share this post


Link to post
Share on other sites
On 10/9/2019 at 11:55 AM, ajzam.inc said:

Hi Maxmp. Please add Hi-Res Support for Redmi Note 8 Pro (Mediatek Helio G90T SoC)

Here is my audio output detection log

 

11:51:53.558 v3-build-841-arm64-play
Device: Redmi Xiaomi Redmi Note 8 Pro begonia begonia [arm64-v8a, armeabi-v7a, armeabi]

FAILED to read=/vendor/etc/audio_output_policy.conf
FAILED to read=/vendor/etc/audio_io_policy.conf
FAILED to read=/system/etc/audio_policy.conf
reading=/vendor/etc/audio_policy.conf
has outputs_primary, sampling_rates=44100|48000|96000|192000
has outputs_primary formats=AUDIO_FORMAT_PCM_32_BIT|AUDIO_FORMAT_PCM_16_BIT
has usb
has usb outputs
has usb_device, sampling_rates=dynamic
has usb formats=dynamic
USB can handle Hi-Res - sdk=28
OK flags=0x386000400000000
FLAG_VARIANT_MTK_HD
FLAG_SUPPORTS_USB
FLAG_FORCE_DVC
FLAG_OUT_PARAMS_UNDETECTABLE
FLAG_SUPPORTS_LDAC
INTERNAL_OUTPUT_FLAG_SR_192K
INTERNAL_OUTPUT_FLAG_SR_96K
INTERNAL_OUTPUT_FLAG_SR_48K
INTERNAL_OUTPUT_FLAG_SR_44K
 

 

Following up this posting. Pls add the G90t to your support list.

Share this post


Link to post
Share on other sites

Just came here to share the joy with fellow Samsung users - the latest Pie update (~week ago) seems to have finally fixed the audio configuration and now I'm seeing a beautiful 192/24 (no 384 though) + DVC on my (Snapdragon) S10e.

 

photo_2019-10-16_16-51-38.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...