andrewilley Posted July 20, 2017 Share Posted July 20, 2017 If you've disabled all of the auto-play and play on connect features in Poweramp, then the headunit is probably sending a Bluetooth Play command as soon as it connects to a remote device. Have you tried asking the manufacturer if it's possible to disable that functionality? The current alpha test builds of PA v3 added a short delay after connection before accepting BT commands, it might be worth giving that a try if you haven't already? Andre Link to comment Share on other sites More sharing options...
speedingcheetah Posted July 20, 2017 Share Posted July 20, 2017 I have been using "alpha-build-703-play (fullVersion) for a while and on mutiple phones. (Moto X pure and LG V10)...is there a newer version somewhere? This auto play thing only happens with Poweramp....no other apps. Also do not have this issue on my other 2 phones...just the Pixel which is bone stock Google Android. There is no options for BT autoplay. only auto connect but that just means i have to manual connect the phone to the head unit (Kenwood HDC-BT762HD) and Poweramp still auto plays when first connect and when i change sources, then back to BT in. Link to comment Share on other sites More sharing options...
andrewilley Posted July 20, 2017 Share Posted July 20, 2017 36 minutes ago, speedingcheetah said: I have been using "alpha-build-703-play (fullVersion) for a while and on mutiple phones. (Moto X pure and LG V10)...is there a newer version somewhere? There is no options for BT autoplay. only auto connect but that just means i have to manual connect the phone to the head unit (Kenwood HDC-BT762HD) and Poweramp still auto plays when first connect and when i change sources, then back to BT in. Build 704 is available from the Downloads tab at the top of this page, but I don't think any changes were made to the Bluetooth code from 703. Worth a try though. There is an option for Resume on Bluetooth, it's in Settings > Headset/Bluetooth. However if this is turned off then something else is sending Poweramp a play command. (I'm assuming you have Settings > Headset/Bluetooth > Audio Focus > Resume on Start turned off, otherwise PA would autoplay whenever the app launches) Andre Link to comment Share on other sites More sharing options...
speedingcheetah Posted July 21, 2017 Share Posted July 21, 2017 4 hours ago, andrewilley said: Build 704 is available from the Downloads tab at the top of this page, but I don't think any changes were made to the Bluetooth code from 703. Worth a try though. There is an option for Resume on Bluetooth, it's in Settings > Headset/Bluetooth. However if this is turned off then something else is sending Poweramp a play command. (I'm assuming you have Settings > Headset/Bluetooth > Audio Focus > Resume on Start turned off, otherwise PA would autoplay whenever the app launches) Andre Updated to build 704. And both of those settings are disabled. The only setting that affects this issue is "Respond to Buttons". Link to comment Share on other sites More sharing options...
andrewilley Posted July 21, 2017 Share Posted July 21, 2017 3 hours ago, speedingcheetah said: Updated to build 704. And both of those settings are disabled. The only setting that affects this issue is "Respond to Buttons". Then there is definitely a command coming from somewhere (presumably the BT device when it notices that it has been connected to a player) which is causing this. Maybe in future when Max next revisits the BT code he might be able to extend the period for which PA ignores initial commands sent to it? I doubt that will be any time soon though as he's got a lot on his plate. Andre Link to comment Share on other sites More sharing options...
speedingcheetah Posted July 21, 2017 Share Posted July 21, 2017 10 hours ago, andrewilley said: Then there is definitely a command coming from somewhere (presumably the BT device when it notices that it has been connected to a player) which is causing this. Maybe in future when Max next revisits the BT code he might be able to extend the period for which PA ignores initial commands sent to it? I doubt that will be any time soon though as he's got a lot on his plate. Andre It's however Poweramp works as no other media player apps does this..... Not a big deal, just have to press my head units pause button every-time i change to BT audio source. Would be great if the dev could integrate BT device connect profiles(kind alike how the EQ settings can be auto set when assigned input is used). So when ## device is detected do not respond to first play command....though that may not stop future play commands that occur when i change head units input source and back to BT....maybe make it changeable so that Play command can be long press or double press to play. Link to comment Share on other sites More sharing options...
0XxClaymanxX0 Posted September 11, 2017 Share Posted September 11, 2017 I having the same problem... I send catlog via email and by private message. Thanks for your work. Link to comment Share on other sites More sharing options...
Yangorang Posted December 4, 2018 Share Posted December 4, 2018 Very annoying issue and the only problem I have with Poweramp. I submitted a feature request to disable Poweramp responding to MEDIA_PLAY command. Link to comment Share on other sites More sharing options...
andrewilley Posted December 4, 2018 Share Posted December 4, 2018 There won't be any change made to Poweramp v2, it is now a legacy product. Andre Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.