Jayjaye Posted November 6, 2020 Share Posted November 6, 2020 我的设备支持hires输出,设置好后,接入usbdac声音会很小,输出选项需要再次设置吗 Quote Link to comment Share on other sites More sharing options...
andrewilley Posted November 6, 2020 Share Posted November 6, 2020 Do you mean the volume is lower? Different output devices sometimes behave differently. Might be worth do a Restore Defaults in Settings > Audio > Output to start from basic settings. Also try enabling DVC (Direct Volume Control) if it is not already enabled. Others Quote Link to comment Share on other sites More sharing options...
Jayjaye Posted November 6, 2020 Author Share Posted November 6, 2020 Hires输出是直接绕过android驱动吗 13 minutes ago, andrewilley said: 您是说音量降低吗?不同的输出设备有时会表现不同。从基本设置开始,最好在“设置”>“音频”>“输出”中执行“恢复默认值”。如果尚未启用DVC(直接音量控制),也请尝试启用它。 其他 Quote Link to comment Share on other sites More sharing options...
andrewilley Posted November 6, 2020 Share Posted November 6, 2020 Just now, Jayjaye said: Does Hires output bypass the android driver directly? Mostly, yes. Enabling DVC does a more complete job of that. Andre Quote Link to comment Share on other sites More sharing options...
Jayjaye Posted November 6, 2020 Author Share Posted November 6, 2020 1 minute ago, andrewilley said: 通常,是的。启用DVC可以完成更完整的工作。 安德烈 我试下 Quote Link to comment Share on other sites More sharing options...
Jayjaye Posted November 7, 2020 Author Share Posted November 7, 2020 2 hours ago, andrewilley said: 通常,是的。启用DVC可以完成更完整的工作。 安德烈 还有不是的情况吗 Quote Link to comment Share on other sites More sharing options...
andrewilley Posted November 7, 2020 Share Posted November 7, 2020 6 hours ago, Jayjaye said: Is there anything else? If this level issue occurs with all output modes, you could also check Reply Gain. If enable, by default that is designed to reduce the overall gain of any tracks which peak at 100% digital levels. The spec RG target is -14dB from digital maximum, to allow plenty of headroom for post-processing. Try turning RG off, and also reset the EQ values to defaults and see if that increases the overall output level. If it does, you can then try adjusting the RG or EQ preamp settings, but if you do want to apply any major EQ boosts then don't go too far or you might introduce clipping distortion. Andre Quote Link to comment Share on other sites More sharing options...
Jayjaye Posted November 14, 2020 Author Share Posted November 14, 2020 开了hires输出声音还是小,为什么,usbdac Quote Link to comment Share on other sites More sharing options...
andrewilley Posted November 14, 2020 Share Posted November 14, 2020 Have you checked any of the things already mentioned? What device, ROM, and file types are you using? (I've moved this part of the discussion to a separate thread as it has nothing to do with feature requests for Poweramp v4) Andre Quote Link to comment Share on other sites More sharing options...
John Titor Posted November 15, 2020 Share Posted November 15, 2020 Yeah, I have experienced this too on a low end device. And the bit depth is reduced to 16bit when it happens. Rebooting your device should fix it. At least, it did for me. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.