MartinMRM34 Posted January 22 Share Posted January 22 My oh my God! it happened. I was missing the app for a long time. Since I purchased the power amp player, the online streaming apps dominated and I missed listening in the app with the EQ and presents. Now wow this is so exciting man. I'm already enjoying with this new Eq app. thanks to the developers. Quote Link to post Share on other sites
John Titor Posted January 23 Share Posted January 23 Dunno, how exactly this happened but MX player pro showed up there..... But I am still noticing the problem Mayuri mentioned, EQ session is still being kept. "Force stopping" the affected apps doesn't remove the audio sessions but uninstalling them does remove it. And of course, rebooting the device does as well. Quote Link to post Share on other sites
John Titor Posted January 23 Share Posted January 23 (edited) And I looked into it more closely and found that even though EQ session of MX Player Pro is being kept, nothing is being equalized. It's like beating a dead horse or chasing after a mirage. Edited January 23 by Someguyonline Quote Link to post Share on other sites
Mayuri Posted January 23 Share Posted January 23 18 minutes ago, Someguyonline said: uninstalling them does remove it. And of course, rebooting the device does as well. Rebooting didn't help me. What it did do is add PlayerPro to the notification, even tho I haven't opened PlayerPro for like at least a week, and it hasn't been active at all since phone reboot... Quote Link to post Share on other sites
andrewilley Posted January 23 Share Posted January 23 39 minutes ago, Mayuri said: Rebooting didn't help me. What it did do is add PlayerPro to the notification, even tho I haven't opened PlayerPro for like at least a week Are you perhaps using Android 11? Andre Quote Link to post Share on other sites
John Titor Posted January 23 Share Posted January 23 Oh I am on Android 10 and after rebooting all equalizer sessions were cleared. On another note, I think it would look good if you add something like "No active player" left to the small info icon if no player is active. Just a suggestion though Quote Link to post Share on other sites
Mayuri Posted January 23 Share Posted January 23 3 hours ago, andrewilley said: Are you perhaps using Android 11? No, I'm still on android 9 😂 Quote Link to post Share on other sites
Marco DAC Posted January 23 Share Posted January 23 I don't understand how to apply adb permissions. is it necessary to connect the cell to the PC? Quote Link to post Share on other sites
ijann Posted January 23 Share Posted January 23 Happily exists freezer.life, I download my music in flac format and I can use the Poweramp player, it hurts that it is from android 9 onwards, a lot of devices that use android Oreo are loading 🤧. I hope that the player in the future can have those options that this equalizer has, and if it does, they could pass a tutorial. 😉 Quote Link to post Share on other sites
andrewilley Posted January 23 Share Posted January 23 2 hours ago, Marco DAC said: I don't understand how to apply adb permissions. is it necessary to connect the cell to the PC? Yes, you need to start by connecting your phone to a PC with a USB cable. For details, see: Andre Quote Link to post Share on other sites
andrewilley Posted January 23 Share Posted January 23 2 hours ago, ijann said: it hurts that it is from android 9 onwards, a lot of devices that use android Oreo are loading As stated before, including in the first post in this thread, the equaliser app requires Android features that were only introduced in release 9, so it cannot be used with Android 8 or earlier. Andre Quote Link to post Share on other sites
John Titor Posted January 25 Share Posted January 25 Just noting, ViPER4Android FX can be used on Android 6.0+ devices. But it apparently requires root access. I am foreseeing/guessing even if Maxmp implements something like that on PEQ, it won't be usable without root/ADB access because of Android system limitations. 🤔 Quote Link to post Share on other sites
John Titor Posted January 25 Share Posted January 25 Also, is there a plan to support reverb options in PEQ? Quote Link to post Share on other sites
andrewilley Posted January 25 Share Posted January 25 3 hours ago, Someguyonline said: I am foreseeing/guessing even if Maxmp implements something like that on PEQ, it won't be usable without root Correct. It might technically be possible to make it work on some earlier Android versions, but would be a hacky solution for each device and would require root. Andre Quote Link to post Share on other sites
maxmp Posted January 26 Author Share Posted January 26 @Someguyonline no, as reverb implementation in modern Androids is bad (mostly adds noise). (Technically it's implemented in Poweramp Equalizer, but disabled). Quote Link to post Share on other sites
John Titor Posted January 26 Share Posted January 26 5 hours ago, maxmp said: @Someguyonline no, as reverb implementation in modern Androids is bad (mostly adds noise). (Technically it's implemented in Poweramp Equalizer, but disabled). You said it's "implemented" 🤔. Is there any hidden activity/window that can exploit it? I mean some users would want to use it. And my pre-installed system equalizer has reverb, just saying. Quote Link to post Share on other sites
andrewilley Posted January 26 Share Posted January 26 Can reverb not be added as an internal bit of code within PA/PA-EQ, rather than relying on some system settings? I know that would be kinda re-inventing the wheel, but if the original supplied wheel is broken... Andre Quote Link to post Share on other sites
maxmp Posted January 26 Author Share Posted January 26 @andrewilley unfortunately, no - we can rely only on the OS effect implementation here. Again, current implementation is not that good and mostly produces noise, but things may improve (though for the next Androids releases only). Quote Link to post Share on other sites
Coddy Posted January 27 Share Posted January 27 @maxmp Can you share more insight about the Samsung Hi-Res issue ? I've noticed while playing Tidal Master tracks that the frequency spectrum animation gets narrowed down and there is no movement above the 4kHz band whereas playing the same track section using HiFi quality there's lots of sound information in the high register during that section. Is not that the high freq sounds are muted, they sound transposed into the lower freq while PEQ is enabled. I supposed this is the issue you are referring. I thought that this would be an issue with Samsung and Tidal MQA Core Decoding triggering UHQ Upsampleing somehow. This is because I've noted that using HiFi tracks and enabling UHQ Upscaler instantly has the same effect of narrowing the frequency spectrum animation. Maybe using the spectrum animation as ground truth wasn't that good of an idea. Any hope for a fix to this ? Maybe using some of the dumpsys info ? Workarounds ? Quote Link to post Share on other sites
Coddy Posted January 27 Share Posted January 27 (edited) Another small question regarding this: Does this mean that Tidal MQA Core Decoding actually produces 96kHz sample rates rather than what I thought would be 48kHz 24bit tracks ?... seen the roots of the issue and all Edited January 27 by Coddy Quote Link to post Share on other sites
DestroyerNile Posted January 29 Share Posted January 29 I'm facing strange problem just purchased equalizer but if I turn my volume 75% + I get distortion how to fix this? Quote Link to post Share on other sites
Mehdipooeid Posted January 31 Share Posted January 31 On 02/12/2020 at 5:10 PM, Edgie70 said: So have you started to see Chrome in your list of players as well ? Quote Link to post Share on other sites
maxmp Posted February 2 Author Share Posted February 2 On 1/29/2021 at 10:28 PM, DestroyerNile said: I'm facing strange problem just purchased equalizer but if I turn my volume 75% + I get distortion how to fix this? Ensure you have DVC enabled (visible in Audio Info). Also if you’re on Samsung @ Android 11 OneUI 3.0 update to build-898. Quote Link to post Share on other sites
Ankit9999 Posted February 25 Share Posted February 25 Dude how can I add different music player like black player to audio processing of this equilizer? Quote Link to post Share on other sites
andrewilley Posted February 25 Share Posted February 25 @Ankit9999 Enable it in PA-EQ Settings > Equalizer > Known Players. See the notes at the top of that menu for more details. For some apps that don't normally allow their output to be modified, you may first need enable extra permissions using a computer (or another phone) connected via a USB cable, see: Andre Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.