Jump to content

Sound response visualization


Recommended Posts

  • 2 weeks later...

Built-in visualizations are fine, third-party visualizations should be good too, to make it more accurate you just have to manually adjust the visualization delay on each output. To do this, first you have to check your audio info and see your latency, you can do that by long tap on the small text in your player screen. For example, mine is 120 ms, so I had to manually adjust the visualization delay to 120 ms in output settings. You can do that by going to Poweramp > Settings > Audio > Output > OpenSL ES Output > Wired Headset / AUX (or whatever you're using) > visualization delay and set it to your own latency. Third-party presets you can edit for your own with any text editor, you have to look for "bars_smooth" and "bars_sensitivity". You can play with the numbers until you find out how it's good for you.

Link to comment
Share on other sites

I think he was saying there are lots of Visualizations built in to Poweramp to try; I've never counted, but in the hundreds I think. Either let them change randomly, or pick one from the selection panel that you can see at the top of the screen while visualisations are running. They all respond to sound levels in various ways. 

Andre

Link to comment
Share on other sites

Yeah i think i went through all the ones i have man that was alot and i found some i really liked. Guess i just wanted the easy way of knowing without actully seeing and admiring all these cool vis that people put all there time and energy into making. (Im assuming its hard, well not hard that aint the word, cant think of it) but eventually i would of did what i just done and went through each and everyone of the Vis i had. Glad i did sooner than later now i want to have more lol getting addicted haha.   Im new to Poweramp litterly did not know it exsited till about a month now. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...