YuRock Posted October 18, 2019 Share Posted October 18, 2019 После последних обновлений перестали нормально работать кнопки перемотки, плей / пауза. Чтобы вернуться к следующему треку, нужно нажать несколько раз (2-3) на кнопку, аналогично вернуться к предыдущему треку и плейза. Телефон Huawei p8 Android 6.0 Link to comment Share on other sites More sharing options...
djdarko Posted October 20, 2019 Share Posted October 20, 2019 Does the app support Multiple Genres (Soul; R&B; Blue-Eyed Soul) or Genres with spaces (Hard Rock) yet? What is the required tagging method? Link to comment Share on other sites More sharing options...
M Akmal Posted October 20, 2019 Share Posted October 20, 2019 I just discovered that the main UI buttons, on visualization-fade control mode, must be presed twice / only worked when album art appears/the control isn't fading. It only happens for this marked buttons. I'm wondering why should it be like that? Isn't it easier if we only press it once, moreover this buttons are still visible during play? Why do only this buttons happen? Link to comment Share on other sites More sharing options...
w3wilkes Posted October 20, 2019 Share Posted October 20, 2019 16 hours ago, djdarko said: Does the app support Multiple Genres (Soul; R&B; Blue-Eyed Soul) or Genres with spaces (Hard Rock) yet? What is the required tagging method? Yes, support for multiple Genres and Genres w/spaces are in the current release. Default separators are ";" and "//", however you can change these separators if you like. Link to comment Share on other sites More sharing options...
majovajo Posted October 22, 2019 Share Posted October 22, 2019 On 10/20/2019 at 11:22 AM, M Akmal said: I just discovered that the main UI buttons, on visualization-fade control mode, must be presed twice / only worked when album art appears/the control isn't fading. It only happens for this marked buttons. I'm wondering why should it be like that? Isn't it easier if we only press it once, moreover this buttons are still visible during play? Why do only this buttons happen? same issue/feature on OP6/beta25 on latest built -seek bar buttons, three dot and bottom info bar (output, next, track quality info) needs to be tapped twice -top visualization bar reacts on first tap but does not invoke opacity change Link to comment Share on other sites More sharing options...
maxmp Posted October 22, 2019 Author Share Posted October 22, 2019 Build 846: stream m3u(8)/pls/wpl playlists can be played directly from file managers experimental HLS audio stream support Hi-Res support for Xiaomi A3, Redmi K20 Pro Hi-Res support for Redmi Note 8 Pro via new MTK Hi-Fi variant support for Google (Web), QuickLyric lyrics search new Navigate to the Folders option increased max possible Stream Network Timeout Tag Encoding option is now used for non-unicode stream metadata multichannel DTS/DCA support fixed issue with buttons in visualization mode other fixes translations updates Link to comment Share on other sites More sharing options...
Mehrshad Shafaghi Posted October 23, 2019 Share Posted October 23, 2019 6 hours ago, maxmp said: Build 846: Hi-Res support for Xiaomi A3, Redmi K20 Pro Sir, the Hi-Res option was there in Redmi K20 Pro before. The volume drop also seems like before. What has been changed in this new build? Link to comment Share on other sites More sharing options...
PChwdhry Posted October 23, 2019 Share Posted October 23, 2019 Thanks for the buil 846. Link to comment Share on other sites More sharing options...
djdarko Posted October 23, 2019 Share Posted October 23, 2019 Max, what is the smallest (in dimensions) cover art supported? I tested a single pixel (1x1px) for a plain album cover, it seems to work within the app, but not for the widget. See image: Link to comment Share on other sites More sharing options...
Prosenjit Posted October 23, 2019 Share Posted October 23, 2019 Wow many thanks for the HLS audio stream support your awesome 🙏 There is a problem in hls stream on my Redmi note 4 the audio is echoing very high amount of echo it feels like i have enabled reverberation. Link to comment Share on other sites More sharing options...
maxmp Posted October 23, 2019 Author Share Posted October 23, 2019 @djdarko for in-folder images current min. size is 4kb. Widget min size is 32x32px - though I will probably remove this check. Note that you can set 1x1px image manually, it will be displayed in Poweramp UI, but not in the widget (requires 32x32px min.). @Mehrshad Shafaghi interesting, I can't reproduce any volume drop for Hi-Res output (DVC + 192kHz/24bit). Do you use some non-stock or beta ROM? Link to comment Share on other sites More sharing options...
djdarko Posted October 23, 2019 Share Posted October 23, 2019 14 minutes ago, maxmp said: @djdarko for in-folder images current min. size is 4kb. @Mehrshad Shafaghi interesting, I can't reproduce any volume drop for Hi-Res output (DVC + 192kHz/24bit). Do you use some non-stock or beta ROM? It's 8kb according to my computer. If you'd like to test the image, here it is: Link to comment Share on other sites More sharing options...
maxmp Posted October 23, 2019 Author Share Posted October 23, 2019 @djdarko here is (same color) 32x32px image ~4.5kb: Link to comment Share on other sites More sharing options...
andrewilley Posted October 23, 2019 Share Posted October 23, 2019 3 hours ago, djdarko said: It's 8kb according to my computer. As someone whose computing experience goes back to before there were any IBM PCs or Apples, my first Atari 800 home computer had a maximum screen resolution of 320x192 (and that only in its monochrome mode) and a full screen image would use the same 8K that now stores one pixel. Just as well though, as the machine otherwise only had a base memory of 16K anyway. Andre Link to comment Share on other sites More sharing options...
maxmp Posted October 23, 2019 Author Share Posted October 23, 2019 @andrewilley the problem with the small images and Android is that something like 16x16 (or 1x1) crashes launcher / lockscreen etc. Link to comment Share on other sites More sharing options...
installerrev Posted October 23, 2019 Share Posted October 23, 2019 On 10/23/2019 at 12:57 AM, maxmp said: Hi-Res support for Xiaomi A3, Redmi K20 Pro Hello @maxmp Thanks for your work. Does this mean that Mi 9T Pro is also officially supported? Link to comment Share on other sites More sharing options...
andrewilley Posted October 23, 2019 Share Posted October 23, 2019 6 hours ago, maxmp said: @andrewilley the problem with the small images and Android is that something like 16x16 (or 1x1) crashes launcher / lockscreen etc. I was just commenting that it's ironic that a single-pixel image file now manages to take up 8K in this modern world - which was my entire bitmap video memory when I first started with computers. Andre Link to comment Share on other sites More sharing options...
VolumeMadness Posted October 24, 2019 Share Posted October 24, 2019 Since one of the last 1-2 builds the bluetooth auto play is way slower than before. Normally it starts playing some seconds after connection is established. Now after the connection is there i have to wait 35-40 seconds for Poweramp to start the music. Was way better in the builds before (on Samsung galaxy s8). This is really annoying in the car when i hear the sound that my phone is connected and then silence. Or with headphones when you are already out of the building and still nothing and when you don't expect it the music kicks in. Anyone else experienced the same? Link to comment Share on other sites More sharing options...
maxmp Posted October 24, 2019 Author Share Posted October 24, 2019 @VolumeMadness if you mean auto resume on bluetooth connection, there is a new option: Settings / Audio Focus / Wait For Storage. Though, it only works with Resume On Start. By itself Poweramp has only 0.5s (or 2s on some xiaomi devices) delay before playback is resumed by Headset/Bluetooth / Resume on Bluetooth option. Longer delays most probably means it's device who sends PAUSE then RESUME commands on connection, you can check if this is so in Poweramp Headset/Bluetooth / Last Processed Commands (after device resumed Poweramp). Link to comment Share on other sites More sharing options...
maxmp Posted October 24, 2019 Author Share Posted October 24, 2019 Build 847: improved stream bitrate detection improved stream metadata fetching 44.1 kHz for Chromecast Audio bug fixes Link to comment Share on other sites More sharing options...
Mehrshad Shafaghi Posted October 25, 2019 Share Posted October 25, 2019 On 10/23/2019 at 10:37 AM, maxmp said: @Mehrshad Shafaghi interesting, I can't reproduce any volume drop for Hi-Res output (DVC + 192kHz/24bit). Do you use some non-stock or beta ROM? Yes, I'm using an Android 9 custom rom. Should I provide something to detect the cause? Link to comment Share on other sites More sharing options...
VolumeMadness Posted October 25, 2019 Share Posted October 25, 2019 @maxmpYeah i mean auto resume. The bt receiver beeps when the device is connected and from there it takes more than just 0.5 or even 2 sec. I checked the processed commands log and it is empty. After about 30 seconds Poweramp logs the connection and starts playing. Let me guess that's android's fault, sadly some builds ago i didn't had such problems 😕 Wait For Storage is disabled. To show that this isn't just a feeling with the slow auto resume i made a test in window mode with a counter. I started the counter when android connects (icon in the top bar changed). As you can see 29 seconds after connect still nothing... Link to comment Share on other sites More sharing options...
djdarko Posted October 26, 2019 Share Posted October 26, 2019 @maxmp There seems to be an issue with the latest update. Using cue/m4a files: 1. Play a track from an album. 2. Go to the track list, then select another track from the same album. 3. The previous song keeps playing with no reaction from the player. Link to comment Share on other sites More sharing options...
majovajo Posted October 26, 2019 Share Posted October 26, 2019 On 10/22/2019 at 3:00 PM, majovajo said: same issue/feature on OP6/beta25 on latest built -seek bar buttons, three dot and bottom info bar (output, next, track quality info) needs to be tapped twice -top visualization bar reacts on first tap but does not invoke opacity change fixed in latest build, many thanks also visualization top bar is always on top of cover art so it hides top area (not shown when paused) idk if bug/feature just to let you know Link to comment Share on other sites More sharing options...
maxmp Posted October 26, 2019 Author Share Posted October 26, 2019 Build 848: fix for Samsung Android 10 beta firmware Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.