Jump to content
Poweramp
Sign in to follow this  
swingzwh

Max, there is a practical suggestion about common functions, please take it!

Recommended Posts

Do you think it's very sensitive to adjust the volume here? As long as you adjust the volume, there will always be sudden loud, sudden low voice, because adjusting the volume here as long as a slight movement will jump 3-5%, or more, it is difficult to fine-tune, adjusting the volume size is also a very common function, as long as you open the player, you will certainly adjust the volume, here is a small suggestion, can you add buttons in these two very blank positions, or If you add the induction area to the blank position on both sides, the volume will be reduced by 1% by clicking on the left, 1% by clicking on the right, and the volume will be slowly increased or decreased by 1% by long pressing. Please consider adding this practical function as soon as possible.

pyl.png.7ef4031f94b2119031e5d489657dd805.png

Share this post


Link to post
Share on other sites
1 hour ago, swingzwh said:

As long as you adjust the volume, there will always be sudden loud, sudden low voice, because adjusting the volume here as long as a slight movement will jump 3-5%, or more, it is difficult to fine-tune

You can increase the number of volume levels, thereby decreasing the step size

026201963346.jpg

Share this post


Link to post
Share on other sites

Right, that big volume knob still affected by (default on many devices) 16 levels of volume, so jumps will happen.

Share this post


Link to post
Share on other sites

To be honest - and this is the first time I really thought about it as I mainly use the EQ anyway - rotary controls (designed to emulate the look and feel of physical devices) don't really make much sense in a touch-screen world. They are hard to adjust with precision and difficult to see how far the adjustment can be tweaked. Sliders would probably be far more usable.

Andre

Share this post


Link to post
Share on other sites
2 hours ago, maxmp said:

Right, that big volume knob still affected by (default on many devices) 16 levels of volume, so jumps will happen.

Max, can you add a button or sensing area that increases or decreases the volume of the voice when the volume is so large on the left and right sides? Now it's really hard for that round wheel to adjust the volume to a certain volume!

Share this post


Link to post
Share on other sites
4 hours ago, blaubär said:

You can increase the number of volume levels, thereby decreasing the step size

026201963346.jpg

Setting up 100, but the volume adjustment of the round wheel is still difficult to fine-tune to a certain volume. We hope to consider adding a small button or sensing area to increase the volume and reduce the volume in the blank position on both sides of the round wheel.

Share this post


Link to post
Share on other sites

 

Would it be possible to gear the existing rotary controls ? As they are currently implemented a rotation span of about 300 degrees covers the complete range from 0% to 100%. Why not give it let's say 2 turns / 720 degrees ? One would have to remove the marker on the knob of course, because its position wouldn't unambiguosly indicate the active value. But this is displayed numerically below, so not much harm done. Alternatively one could decouple the speed of turning and displaying to keep the marker as display.

Provided the controls are able to do that 😀

0262019122759.jpg

 

0262019123239.jpg

Share this post


Link to post
Share on other sites
14 hours ago, blaubär said:

 

Would it be possible to gear the existing rotary controls ? As they are currently implemented a rotation span of about 300 degrees covers the complete range from 0% to 100%. Why not give it let's say 2 turns / 720 degrees ? One would have to remove the marker on the knob of course, because its position wouldn't unambiguosly indicate the active value. But this is displayed numerically below, so not much harm done. Alternatively one could decouple the speed of turning and displaying to keep the marker as display.

Provided the controls are able to do that 😀

0262019122759.jpg

 

0262019123239.jpg

Right, or add a button (+, -) to the right and left sides of the volume wheel directly. This should be the simplest solution. Now the round wheel is too sensitive to be easy to fine-tune.

Share this post


Link to post
Share on other sites
6 hours ago, swingzwh said:

Right, or add a button (+, -) to the right and left sides of the volume wheel directly. This should be the simplest solution. Now the round wheel is too sensitive to be easy to fine-tune. 

If we want to apply this to the master volume control alone then you're right.

If we want to make the rotary controls generally less sensitive then that won't do.

Share this post


Link to post
Share on other sites
28 minutes ago, blaubär said:

If we want to apply this to the master volume control alone then you're right.

If we want to make the rotary controls generally less sensitive then that won't do.

I hope to join (+, -) as soon as possible. Thanks!:lol:

Share this post


Link to post
Share on other sites

I think the + and - buttons idea is a good one. It would certainly be easier to use for those who are having any trouble with it. Since it would be adding buttons in blank spots, I don't see the harm.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...