ReinS Posted March 17, 2018 Share Posted March 17, 2018 I have serious problems using Poweramp on Huawei Mate Pro 10. It stops playing about 10 minutes after mobile screen off. And it start playing after pressing power button until screen off again. All possible tweaks like wakelock, keep service etc. already tested without any success. Also Android power management settings change from automatic to manual for this app doesn't change anything. Any advice? Regards, Rein Link to comment https://forum.powerampapp.com/topic/11187-poweramp-and-huawei-mate-pro-10/ Share on other sites More sharing options...
andrewilley Posted March 17, 2018 Share Posted March 17, 2018 It does sound like you've dealt with all the obvious possible issues, but it must be something in your device that is closing PA down when it enters a deep sleep state. As you've already set the power management option though, I can't see what else can be done. Have you asked in a Huawei forum? Andre Link to comment https://forum.powerampapp.com/topic/11187-poweramp-and-huawei-mate-pro-10/#findComment-46465 Share on other sites More sharing options...
Barada Posted April 14, 2018 Share Posted April 14, 2018 I have the exact same problem, but on a Huawei P10 plus. I've also tried everything including finding the new look battery optimisation under Apps>special access>ignore battery optimisation to no avail. Something, since the update to Android 8.0, has caused Poweramp to not be able to stay awake. Finally I solved the problem by purchasing Jetaudio plus which doesn't experience these problems at all! In other words Jetaudio manages something that Poweramp doesn't. I've no idea what? I'm posting just to let other Huawei users with Android Oreo know that the Poweramp problem seems unfixable. Link to comment https://forum.powerampapp.com/topic/11187-poweramp-and-huawei-mate-pro-10/#findComment-47266 Share on other sites More sharing options...
pauljwells Posted June 4, 2018 Share Posted June 4, 2018 Joined the forum to advise USB Audio Player Pro also had this problem but the dev, Davy, found Huawei make an additional check for background processing. UAPP now works properly. Maybe PA dev can look for the same thing? Link to comment https://forum.powerampapp.com/topic/11187-poweramp-and-huawei-mate-pro-10/#findComment-51060 Share on other sites More sharing options...
maxmp Posted June 4, 2018 Share Posted June 4, 2018 Thanks for the reports, few questions: - is this Poweramp v2? Have you tried any v3 build? - does this reproduce on wired headset, speaker, or BT, or everything? Unfortunately, v2 updates are not planned, all the development progress is in v3 builds. Link to comment https://forum.powerampapp.com/topic/11187-poweramp-and-huawei-mate-pro-10/#findComment-51062 Share on other sites More sharing options...
Victor Nworgu Posted June 4, 2018 Share Posted June 4, 2018 3 hours ago, maxmp said: - is this Poweramp v2? Have you tried any v3 build? "any v3 build"? Last time I checked, u've only released one v3 build which is the incomplete v3 preview build 790. Link to comment https://forum.powerampapp.com/topic/11187-poweramp-and-huawei-mate-pro-10/#findComment-51083 Share on other sites More sharing options...
andrewilley Posted June 4, 2018 Share Posted June 4, 2018 10 minutes ago, Victor Nworgu said: "any v3 build"? Last time I checked, u've only released one v3 build which is the incomplete v3 preview build 790. That would be apart from builds 700-709 released over the past two years I assume? 709 works very nicely for daily use for example. See https://forum.powerampapp.com/files/category/2-alpha-test-builds-of-poweramp-v3/ Andre Link to comment https://forum.powerampapp.com/topic/11187-poweramp-and-huawei-mate-pro-10/#findComment-51086 Share on other sites More sharing options...
maxmp Posted June 4, 2018 Share Posted June 4, 2018 So I tested recent 709 build (default settings) on Huaweis: P20, P9 lite, 8 Pro, Mate 10 - they played non stop without any issues for 2+ hours on wired headsets. Though, I didn't change any Poweamp or phone settings - there are quite advanced Power/Battery settings in Huaweis. Link to comment https://forum.powerampapp.com/topic/11187-poweramp-and-huawei-mate-pro-10/#findComment-51088 Share on other sites More sharing options...
Franc1sc0 Posted June 5, 2018 Share Posted June 5, 2018 On 6/4/2018 at 9:04 PM, maxmp said: Así que probé la compilación 709 reciente (configuración predeterminada) en Huaweis: P20, P9 lite, 8 Pro, Mate 10: jugar ininterrumpidamente sin problemas durante más de 2 horas en auriculares con cable. Sin embargo, no hay modificaciones disponibles de Huaweis. Salu2, Con la configuración en gestor de sistema + batería + inicio de aplicaciones (sin cerrar en segundo plano) o la gestión de forma automática no debería cerrarse, yo en ALP-L09 8.0.0.136(C432) y compilación 709 y 790 de Poweramp en ese aspecto trabajan bien. Traductor de Google: With the configuration in system manager + battery + application startup (do not close in second pano) or managed automatically should not be closed, I in ALP-L09 8.0.0.136 (C432 (and build 709 and 790 of Poweramp in that aspect works well. Link to comment https://forum.powerampapp.com/topic/11187-poweramp-and-huawei-mate-pro-10/#findComment-51138 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.