Jump to content


Approved Members
  • Posts

  • Joined

  • Last visited

 Content Type 




Poweramp Knowledge Base

База знаний Poweramp


Poweramp Equalizer Knowledge Base

База знаний Poweramp Equalizer

Everything posted by dvhttn

  1. Same here on a Note 9 (Android 10). Same default options as Andre.
  2. You should also look into the Lexus stereo BT and check for any BT issues with that, maybe related to which firmware version it's running. Lots of problems turn out to be the car's fault.
  3. Just to add that I've recently started using (got working!) Android Auto on our works vans (new Mercedes box vans). I can confirm the play/pause issues mentioned above but also a different issue that's probably related. If the playing gets interrupted for any reason (for example, today my phone holder, and thus my phone, fell off the windscreen and broke the cable connection. Plugging things back in and everything was fine except that PA would only do the play/pause thing. But a subsequent 'play' only led to an immediate 'pause'. I tried play on the head unit and phone with the same results. I decided to leave it as it was and about 10 minutes later (when I could next stop and check) it started to play again when I hit the 'play' button. The playing has been interrupted for other reasons over the last week and a similar thing has happened. Note 9 running a mostly stock Android 10 with the 864 version of PA.
  4. What do you mean here? If you turn the ignition off then BT should not be connecting/connected at all as there's no power to it. And any connecting/disconnecting is to do with your phone and/or the BT device you have in your car. PA and other 'apps' just use the BT connection as negotiated between the phone and car stereo.
  5. Same here - and the same symptons described by you above with the brief music clip then pause. However, I'm using Android Auto for Phone Screens rather than AA as you seem to be. Dunno if that helps at all ...?
  6. Hmmm. Maybe something in your settings? As I also have a Note 9 under Android 10 but don't have that problem.
  7. Have you checked the firmware on your car audio is the latest verion? I had a simlar problem that pointed to PA but it turned out to be a firmware issue with the stereo. I also have access to several different car stereos, partly through work. A 4 year old Kenwood stereo will only show track number whilst an Android 4 based Honda stereo will show all tags. As will a new Mercedes stereo (in a Merc commercial van but I believe the same as in the current A-Class). A VW van also displayed correctly. So your mileage may vary due to the car/stereo manufacturer and/or stereo firmware level.
  8. Yep. Same here. Just the album artist images not being shown. Running on Pie.
  9. Got a Galaxy Note 9 on Pie. I have no problems connecting via BT to my aftermarket car headunit, wireless headphones, BT ear piece or the wifes Honda Jazz stereo which is based on an Ice Cream Sandwich Android .... Oh, and that's with several different ROMs based on Pie. Maybe a factory reset needed?
  10. Running v. 853 on a Galaxy Note 9 (stock Pie-based ROM) and have had several instances of PA starting to play again for no apparent reason. The first time I noticed was on getting home after everyone else had gone to bed and it starting up loudly when I got into my house. In the car it had been on 'shuffle all songs' but I hit the pause button before I got out and switched to my phones home screen - no PA app or widget there. I swapped cases in the house and it was then it started to play. But it's also done it when my phone is on silent and I only notice when I pull the notification bar down. Not seen anything to suggest why it is playing for no reason. Only things I can think of are a) the Note 9 has a Bixby button which is easy to press when getting out of your pocket BUT I have turned off all Bixby stuff in the settings and used an app to remap that bhutton so that the only thing it does is turn the flashlight on/off with a long press and b) this did not happen with previous versions of PA (I usually install all betas when they come out) on this or any other phone I've used it on. So, my question is, what am I doing wrong ... ❓
  11. I use mp3tag on my PC. It allows you to choose as many tracks as you like to embed the same album art in. Using it at the moment coincidentally ....
  12. As I said above, I have no problems. Since I posted above I have swapped my Galaxy S7 (various customs ROMs and sizes of sdcards) for a Note 9 (again, tried various ROMs) with a 512GB sdcard (exFAT) No problems with any of them. Has PA got storage permission? And @Mugetsu, what exactly is your problem?
  13. That worked. But too late for me to check 'file not found' properly. Though flicking from track to track with PA on pause seems fine.
  14. Noticed that mine is also like this (trial). But your suggestion doesn't work as PA is still time limited afterwards. Do I need to reinstall it? Thanks
  15. This has also been reported in the 'Bugs' section at ... I thought it had disappeared when I loaded a new ROM onto my Note 9 but no .... My phone works as above (i.e. 'can't play file' then plays it anyway) but reacts slightly differently if set to 'Pause'. If I swipe the album art to the left (to go to the next song) it gives the same error BUT skips that song and settles on the next one in the list. etc etc. On the 836 build, Note 9 on a Pie based ROM and my music is on an sdcard formatted as exFAT. Dunno if that latter bit helps .... ?
  16. OK. Noticed it whilst I was in the car so couldn't play with it too much. Just taken another look and all now appears normal. What I know I did was a) android settings>apps>Poweramp - and cleared storage cache and b) permissions - turned storage permission off then on again. Not sure what happened there then. I'll get back if it happens again.
  17. Hmmmm. Seems I'm getting the same issue. Tracks play but .... a) I get that 'Failed to play file' message and b) the visualisation bar does not move. Thought it was to do with a ROM change on my Note 9 but it has just been since I installed 835. All permissions granted etc etc. On stock based Pie on on a Galaxy Note 9. Ta Dave
  18. 829 works with absolutely no problems for me with a BT ear piece, BT headphones and my car stereo headunit (Kenwood).
  19. I'm on the latest version of PA and I can see it in Album mode. My language is English though so maybe it's to do with the language somehow? Can you try switching it to English to see if it appears then? Not a fix but a clue as to what's happening.
  20. Just did more testing. Samsung Music also doesn't send track information to my HU, just the same track number and elapsed time. As the HU displays the correct information for a brief time after I hard reset it then I'm inclined to believe a HU issue.
  21. Nope. Deleted the pairing on my phone and turned BT off. Deleted the pairing from my car's HU then turned everything on and paired again. Still just the track number and elapsed time showing. So, I did a little test. Cleared out the 'BT last processed commands' list first. I started PA with no BT devices nearby and chose a new track on 'pause'. Turned the car HU on and waited for it to connect to my phone (connecting is set to automatic but takes 30 seconds or so). Started the track and played about 5 seconds. Hit 'pause' on the PA screen on my phone then turned the car HU off. Below is the complete list of 'BT last processed commands'. There's always the chance that I'm doing something wrong/have something set incorrectly so I wonder if someone more knowledgeable with BT could point anything out? The HU is a Kenwood KMM-BT302. Thanks. ================== 10:27:15.324 HeadsetPlugReceiver headset event connection BT=true am mode=0 ================== 10:27:21.896 HeadsetPlugReceiver headset event connection BT=true am mode=0 ================== 10:27:59.295 HeadsetPlugReceiver headset event disconnection BT=false am mode=0 no_keep_notif_on_dscn=false ================== 10:27:59.299 HeadsetPlugReceiver headset event disconnection BT=true am mode=0 no_keep_notif_on_dscn=false ================== 10:27:59.319 HeadsetPlugReceiver headset event disconnection BT=true am mode=0 no_keep_notif_on_dscn=false
  22. Probably not that as I have to repair every time I change ROMs on my phone. I've done this several times since installing PA 8xx but I'll try and remember to test this tomorrow. Thinking about it I don't 'delete' the pairing from the HU, just re-pair so I'll ensure I delete from phone and HU before the re-pair process.
  23. Right, found them. But no change. Still only trrack number and elapsed time on the display. Still leaning towards the HU though. It does work fine on the wife's Honda HU in her car. That runs on a custom version of Android 4.x ......
  24. Not seen any ....... hmmm ... Any pointers to where they are? (I'm on 820)
  25. OK. Difficult to know if this is Poweramp or the radio I have (Kenwood KMM-BT302, a couple of years old but on the latest firmware). I've tried to reset the PA bluetooth settings to 'default' and the PA audio settings to 'default' (in Advanced Tweaks). I've tried all 3 AVRCP profiles I have in the developer settings on my phone (AVRCP 4, 5 and 6) but none of this gets me artist/track etc on my headunit. What did work briefly was when I did a hardware reset on my headunit which caused track info. to appear for a few moments after which it reverted to 'situation normal' which is showing track number and track run-time. I'm leaning to the conclusion that it's actually the HU that's the problem, based on past experiences and the number of BT issues people mention online with BT and car HUs which turn out to be the HU fault. But if someone can convince me I'm wrong please step forward ......
  • Create New...