Jump to content

ajzam.inc

Approved Members
  • Posts

    8
  • Joined

  • Last visited

 Content Type 

Profiles

Forums

Blogs

Gallery

Downloads

Poweramp Knowledge Base

База знаний Poweramp

Poweramp知识库

Poweramp Equalizer Knowledge Base

База знаний Poweramp Equalizer

Store

Events

Ideas

Everything posted by ajzam.inc

  1. Hi-Res Support request for OPPO RENO 7 5G Dimensity 900 (can play in Hi-res, can select any sample rate available - 192khz, 96khz, 48khz, 44.1khz - but the output only stays at 48khz. Here's the Log: 09:08:37.776 build-939-uni Device: OPPO OPPO CPH2371 CPH2371T2 oplus6877 "mt6877" OPD4A1L1 CPH2371_11_A.14 [arm64-v8a, armeabi-v7a, armeabi] mt6877 is_mtk FAILED to read=/vendor/etc/audio_output_policy.conf FAILED to read=/vendor/etc/audio_io_policy.conf FAILED to read=/system/etc/audio_policy.conf reading=/vendor/etc/audio_policy.conf has outputs_primary, sampling_rates=44100|48000|96000|192000 has outputs/primary formats=AUDIO_FORMAT_PCM_32_BIT|AUDIO_FORMAT_PCM_16_BIT has usb has usb outputs has usb_device, sampling_rates=dynamic has usb formats=dynamic forcing FLAG_VARIANT_MTK_HIFI USB can handle Hi-Res - sdk=30 OK flags=0xd24001c00000000 FLAG_VARIANT_MTK_HIFI FLAG_FORCE_PCM_8_24 FLAG_SUPPORTS_USB FLAG_SUPPORTS_FLT_DYN_RANGE FLAG_SUPPORTS_LDAC FLAG_DLFCN INTERNAL_OUTPUT_FLAG_SR_192K INTERNAL_OUTPUT_FLAG_SR_96K INTERNAL_OUTPUT_FLAG_SR_48K INTERNAL_OUTPUT_FLAG_SR_44K
  2. Sample Right of Higg-Res output always reverting back to 48kHz on Redmi Note 8 Pro. Upon Removal and Insertion of headphone jack, then it's temporarily fixed. Sometimes, it's annoying. Hehe. Poweramo build 872-874 High Res Output Android 10 MIUI 11
  3. Yes. I am surprised when I'm about to change that in settings, the option for Battery Saver is set to 'No restrictions'. I'll try your recommended settings for audio buffer and sampling rate tho I'm currently using the lower one—48kHz. Thank.You
  4. Okay, Will try. Thanks! God bless. EDIT: the Battery Saver options for Unlocker and Main App were already set to 'No Restrictions'. But the audip jittering is still there.
  5. Hi! To follow up my feedback, the issue regarding the BASSY output is not just in Poweramp but on the phone itself. I'll right it to Xiaomi devs. Audio Detection Log 21:54:18.194 v3-build-846-uni Device: Redmi Xiaomi Redmi Note 8 Pro begonia begonia [arm64-v8a, armeabi-v7a, armeabi] FAILED to read=/vendor/etc/audio_output_policy.conf FAILED to read=/vendor/etc/audio_io_policy.conf FAILED to read=/system/etc/audio_policy.conf reading=/vendor/etc/audio_policy.conf has outputs_primary, sampling_rates=44100|48000|96000|192000 has outputs/primary formats=AUDIO_FORMAT_PCM_32_BIT|AUDIO_FORMAT_PCM_16_BIT has usb has usb outputs has usb_device, sampling_rates=dynamic has usb formats=dynamic forcing FLAG_VARIANT_MTK_HIFI USB can handle Hi-Res - sdk=28 OK flags=0xd26001c00000000 FLAG_VARIANT_MTK_HIFI FLAG_FORCE_PCM_8_24 FLAG_SUPPORTS_USB FLAG_SUPPORTS_FLT_DYN_RANGE FLAG_OUT_PARAMS_UNDETECTABLE FLAG_SUPPORTS_LDAC FLAG_DLFCN INTERNAL_OUTPUT_FLAG_SR_192K INTERNAL_OUTPUT_FLAG_SR_96K INTERNAL_OUTPUT_FLAG_SR_48K INTERNAL_OUTPUT_FLAG_SR_44K Seems like it does have a 32bit sample format support but the actual sample format is just 24bit. Also, im Hi-Res output setting, there's mo toggle for headroom gain.
  6. Hello MAXMP Seems like the Hi Res support for Redmi Note 8 Pro is added successfully. I'm using it right now. But one thing, Injust wanted to report this issue: when Hi Res output is enabled, there are many cases, when the phone screen was turned off, the sound output produces some fluctuations (idk if that's the correct term) or for easier acknowledgement, there's some repeated audio frames (I estimate it from 70ms to 250 or 300). I tried all the possible tweaks but no luck. Use Wakelock on/off: issue persists Audio Buffer small/normal/medium/large and even custom values: issue still persists Repeated the audio buffer setting for each available sample rate: issue still persist tho when using 48kHz, the fluctuating effect seems to be minimal but, still annoying Keep Service on/off: yes, issue was still there Change the resampler from SW to SoX: still there, not fixed. Enabling/Disabling DVC (tho DVC is set to enabled always in Hi Res): still there, not fixed. And I don't know if this is just in Poweramp, I'll get back to you later after some tests: the audio was so BASSY like there's some +2-3db addition in low shelf frequencies. I hope you can fix the main issue that I was told here. Thanks!
  7. Hi Maxmp. Please add Hi-Res Support for Redmi Note 8 Pro (Mediatek Helio G90T SoC) Here is my audio output detection log 11:51:53.558 v3-build-841-arm64-play Device: Redmi Xiaomi Redmi Note 8 Pro begonia begonia [arm64-v8a, armeabi-v7a, armeabi] FAILED to read=/vendor/etc/audio_output_policy.conf FAILED to read=/vendor/etc/audio_io_policy.conf FAILED to read=/system/etc/audio_policy.conf reading=/vendor/etc/audio_policy.conf has outputs_primary, sampling_rates=44100|48000|96000|192000 has outputs_primary formats=AUDIO_FORMAT_PCM_32_BIT|AUDIO_FORMAT_PCM_16_BIT has usb has usb outputs has usb_device, sampling_rates=dynamic has usb formats=dynamic USB can handle Hi-Res - sdk=28 OK flags=0x386000400000000 FLAG_VARIANT_MTK_HD FLAG_SUPPORTS_USB FLAG_FORCE_DVC FLAG_OUT_PARAMS_UNDETECTABLE FLAG_SUPPORTS_LDAC INTERNAL_OUTPUT_FLAG_SR_192K INTERNAL_OUTPUT_FLAG_SR_96K INTERNAL_OUTPUT_FLAG_SR_48K INTERNAL_OUTPUT_FLAG_SR_44K
×
×
  • Create New...