Romain1998
-
Posts
26 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Downloads
Poweramp Knowledge Base
База знаний Poweramp
Poweramp知识库
Poweramp Equalizer Knowledge Base
База знаний Poweramp Equalizer
Store
Events
Ideas
Posts posted by Romain1998
-
-
@maxmp Is the Parametric Equalizer IIR (Infinite Impulse Response) or minimum phase?
-
SoX resampler include many settings aside from bandwith and dithering, such as VHQ SRC, steep filter, phase response and anti aliasing. Since resampling oftenly takes place, could you please consider including all the sound settings SoX has to offer? That would give more control over the sound quality and signature. Thanks in advance.
-
18 hours ago, maxmp said:
@Romain1998 sorry, I though the issue was the sample rate. Now it's something related to the volume? Poweramp may change volume slightly (+/- 1) for few seconds after the BT connection if "No DVC For Absolute Volume" option is enabled. This is never more than +/-1 and not generally noticeable. There is no other way to check for the Absolute Volume as Google bugged everything related to it in the recent androids (looks like new team works on BT stack and they just keep everything they don't use/test in broken state), but if you know you have Absolute Volume disabled, you can just disable option "No DVC For Absolute Volume" to avoid any volume changes. Android still will restore some previous volume for the Bluetooth + the BT device may also have some other volume level.
@maxmp Actually, it's when the Bluetooth Hi-Res output sample rate resets itself to 48 khz that the volume also starts to automatically change. This makes the issue even more annoying. I don't think it's related to the DVC though, since I don't have it activated.
-
45 minutes ago, andrewilley said:
@Romain1998 I use task management tools. Bixby Routines free on Samsung devices is handy, you can set it to apply certain volume levels when you connect a specific Bluetooth device, and set them back again afterwards.
Andre
@andrewilley Right, thanks for the tip, but can you fix it?
-
On 4/3/2021 at 1:34 PM, maxmp said:
@Romain1998 Poweramp follows system here, ensure you have ldac working for 96khz.
@maxmp I didn't precise it, but when the sample rate resets itself to 48 khz (for instance, when Poweramp is not playing any sound, working in background and then used again), the volume also automatically and drastically increases and decreases up until I pick another sample rate in the app.
Sometimes, when I forget about it and I'm using my headphones, it catches me by surprise and hurts my ears. Please, could you do something about this? It's really irritating.
-
-
The sample rate in Bluetooth Hi-Res output keeps on resetting itself to 48 khz. Could you please fix it?
-
@░▒▓█ クリス █▓▒░ I don't pretend I can hear the frequencies, but i might hear a more natural and proprer sound.
-
@andrewilley No, I'm Batman lol. Jokes aside, because it might make sound more soft and natural on DACs which support it.
-
Hello, i was just wondering if you could please add 768 khz output. Thanks.
-
Hello, I was just wondering if you could please allow 32 bit output on the Xiaomi Mi 9T Pro. Thanks.
19:03:09.230 v3-build-883-arm64-play
Device: Xiaomi Xiaomi Mi 9T Pro raphael raphael "qcom" raphael QKQ1.190825.002 test-keys [arm64-v8a, armeabi-v7a, armeabi]msmnile is_snapdragon
FAILED to read=/vendor/etc/audio_output_policy.conf
reading=/vendor/etc/audio_io_policy.conf
has direct_pcm_24, sampling_rates=44100|48000|88200|96000|176400|192000|352800|384000
AUDIO_OUTPUT_FLAG_DIRECT direct_pcm_24
has direct_pcm_24 formats=AUDIO_FORMAT_PCM_24_BIT_PACKED|AUDIO_FORMAT_PCM_8_24_BIT|AUDIO_FORMAT_PCM_32_BIT
FLAG_VARIANT_DIRECT_HD via direct_pcm_24
forcing FLAG_DLFCN FLAG_NEEDS_DEEP_BUFFER FLAG_NEEDS_EXTRA_SLEEPS
MIUI=10
=> FLAG_VARIANT_DIRECT_HD_10_STREAM
USB can handle Hi-Res - sdk=29
OK flags=0xe74616600008000
FLAG_VARIANT_DIRECT_HD_10_STREAM
FLAG_SUPPORTS_PCM_8_24
FLAG_SUPPORTS_PCM_24
FLAG_SUPPORTS_PCM_32
FLAG_SUPPORTS_UNITY_GAIN_STREAM
FLAG_SUPPORTS_USB
FLAG_NEEDS_EXTRA_SLEEPS
FLAG_SUPPORTS_LDAC
FLAG_DLFCN
FLAG_NEEDS_DEEP_BUFFER
FLAG_ALLOW_DVC_EFFECT
FLAG_BT_DVC_EFFECT
PA_OUTPUT_CAP_NEEDS_VOL_UI
INTERNAL_OUTPUT_FLAG_SR_384K
INTERNAL_OUTPUT_FLAG_SR_352K
INTERNAL_OUTPUT_FLAG_SR_192K
INTERNAL_OUTPUT_FLAG_SR_176K
INTERNAL_OUTPUT_FLAG_SR_96K
INTERNAL_OUTPUT_FLAG_SR_88K
INTERNAL_OUTPUT_FLAG_SR_48K
INTERNAL_OUTPUT_FLAG_SR_44K
Poweramp Equalizer builds 899-908
in Equalizer App New Releases
Posted
@maxmp OK, thanks for the reply.