Jump to content
Poweramp

maleck

Approved Members
  • Content count

    10
  • Joined

  • Last visited

About maleck

  • Rank
    Member
  1. oh Yes, I know this. But if you look at my screenshot, the same beats solo3 headset can adjust the sampling rate on Lenovo's mobile phone, it can be upgraded to 96kHz and the output is correctly displayed, but there is no way to change the sampling rate on the htc phone. Will this be a limitation for the htc mobile phone system? Because I have the impression that in a previous version it was possible to adjust the sampling rate, I don't know when it started to suddenly adjust. And there is a problem occasionally, that is, the Bluetooth hi-res output has been selected, and the next time the Bluetooth connection is disconnected, it will become the output of OPENSL ES! When you enter the audio settings, the hi-res of Bluetooth is enabled but not valid, but the ES speaker is activated, but the actual speaker does not sound, and the sound still comes out of the Bluetooth headset. (pictured) I just want to know if the cause of this problem is related to the htc system? Is there any other solution that can be solved? More questions, thank you!😊 —————————————————————————————— 是的,这个我知道。但你看我的截图,同一个beats solo3的耳机在联想的手机上就可以调整采样率,可以提升到96kHz并且正确输出显示,但在htc手机上就没办法更改采样率。这会不会是htc手机系统给限制了呢?因为我有印象,在以前的某个版本中是可以调整采样率,不知道从什么时候开始就突然无法调整了。 而且还有一个问题偶尔出现,就是已经选择了蓝牙hi-res输出,断开蓝牙连接下一次再连接后,会变成OPENSL ES的输出!进入到音频设置看到,蓝牙的hi-res已经启用但是无效,而生效的却是ES的扬声器被激活,但实际扬声器并没有发声,声音依然还是从蓝牙耳机里出来的。(如图) 我就想知道会造成这个问题的原因是不是跟htc的系统有关系?还有没有其它可以解决的办法呢? 问题比较多,谢谢!
  2. beats solo3蓝牙耳机无法选择高采样率的问题! 之前反馈过hi-res选择了高采样率实际上却保持48kHz的问题,得到了解决的办法,现在有线连接和usb DAC都能正确选择高采样率播放,真的非常感谢。 不过现在又遇到一个很奇怪的问题! 同样是828版本的app,连接同一个beats solo3蓝牙耳机,在联想骁龙636安卓8.1系统的手机上是可以选择高采样率并正确显示(如图),但在htc u11安卓8.0系统上选择了高采样率实际输出却只有44.1kHz,无法提升采样率(如图)!恢复音频输出的默认设置的办法也无法更改采样率! 同一个耳机在联想的系统上就可以更改采样率,但在htc的手机上就无法更改采样率,请问这是htc的系统导致的么?有没有办法解决呢? 谢谢!!! —————————————————————— Beats solo3 Bluetooth headset can not choose the high sampling rate! Previous feedback on hi-res chose a high sampling rate but actually kept 48 kHz, and got a solution. Now wired connection and usb DAC can correctly select high sampling rate playback, thank you very much. But now I have a very strange problem! The same version of the 828 app, connected to the same beats solo3 Bluetooth headset, on the Lenovo Snapdragon 636 Android 8.1 system phone can choose high sampling rate and display correctly (pictured) but selected on htc u11 Android 8.0 system The actual output of the high sampling rate is only 44.1 kHz, which cannot increase the sampling rate (as shown in the figure)! The method of restoring the default settings of the audio output also cannot change the sampling rate! The same headset can change the sampling rate on Lenovo's system, but the sampling rate cannot be changed on the htc phone. Is this caused by the htc system? Is there a way to solve it? Thank you! ! !
  3. OMG!Thank U SOOOOOOOOO~ MUCH!!!It's working NOW~~~~~~~~~~~~```😘Lovin' U!!!
  4. 关于hi-res采样率不能更改的问题! 你好,我有一个问题想咨询一下! 我的设备是htc u11,目前使用的系统是安卓8.0!我记得之前可以在hi-res选项里选择高采样率后实际显示的输出采样率也被提高,但是最近重置系统后发现不管怎么选择高采样率,最后实际输出的只能是48kHz,无法提升!而我另一台联想手机,采用高通骁龙636处理器,安卓8.1系统,同样版本的poweramp却能够选择高采样率后实际输出也显示选择的高采样率! 我想咨询一下,出现这个问题到底是poweramp兼容的问题?还是手机系统造成的限制问题?就目前而言,我的htc u11有办法解决吗? 谢谢! —————————————————————— Hello, I have a question I would like to consult! My device is htc u11, the system currently used is Android 8.0! I remember that the actual output sample rate can be improved after selecting the high sampling rate in the hi-res option. However, after resetting the system recently, I found that no matter how high the sampling rate is selected, the actual output can only be 48 kHz, which cannot be improved. ! And my other Lenovo mobile phone, using Qualcomm Snapdragon 636 processor, Android 8.1 system, the same version of Poweramp can choose a high sampling rate and the actual output also shows the selected high sampling rate! I would like to consult, is this problem a Poweramp compatible problem? Or is it a limitation caused by the mobile phone system? For now, is there a way for my htc u11 to be solved? Thank you very much!
  5. use chinese~~~~~·· 你好!反馈一个关于hi-res不能正常工作的问题! 问题现象:之前连接上蓝牙耳机后就已经选择了音频激活为hi-res,但关闭使用一段时间后,再次连接上蓝牙耳机却出现Opensl es激活,而并非hi-res!但在hi-res上可以看到蓝牙是被选中的!而实际音频走的是Opensl es!而Opensl es显示的是激活的扬声器,但实际上音频还是只有从蓝牙耳机里出来,扬声器并没有发声。这个时候非要再次关闭打开蓝牙的hi-res一次,功能才会正常恢复!如图所示。 而下一次再次断开蓝牙耳机一段时间后,再次连接,就会偶尔出现这个问题,并不是每一次都有。这个问题是从升级到82x版本后开始出现的,不是一直都存在的。而此前的版本,几乎没有出现过这个问题。 设备是:htc u11 Android 8.0,蓝牙耳机是Beats Solo3 Wireless。 希望能看看到底是什么原因导致此问题的发生!谢谢!
  6. maleck

    Poweramp beta build-792

    真的很棒!很漂亮!希望之后补全各种语言翻译就完美了!感谢!
  7. 非常感谢作者你又更新了706,辛苦啦! 我发现,如附件图所示,我另一台htc m7 是安卓4.4系统,能够安装705、706,但是无法运行,会报错!而703、704则不会。 是不是从705开始已经不兼容安卓5.0以下的系统了啊?谢谢! ——————————————————————————————- Thank you so much for the author. You have updated 706 again.I found that, as shown in the attached figure, my other htc m7 is an Android 4.4 system. I can install 705, 706 but it will not work. An error will occur! And 703, 704 will not.Is it not compatible with Android 5.0 from 705? Thank you!
  8. maleck

    705 Bug Reports!lock stop play!

    非常感谢你的回复! 按照你所说的我都设置了,但是依旧会遇到锁屏后5秒音乐停止。 我相信应该是系统问题而不是poweramp的bug,升级到706这个问题还是有。因为在安卓7.1的时候同样的版本都没问题,就是升级到8.0后才遇到的!而且我也已经把poweramp加入到了所有电源优化的白名单里。我想还是htc u11 8.0 rom的问题吧!。非常感谢! ————————————————————————————————————————————————- Thank you very much for your reply!According to what you said I have set, but still will encounter 5 seconds after the lock screen music stops.I believe that it should be a system problem and not a Poweramp bug. There is still a problem with upgrading to 706. Because in the Android 7.1 when the same version is no problem, it is only after the upgrade to 8.0 encountered! And I have also added Poweramp to all the power optimization whitelists. I think htc u11 8.0 rom problem! . thank you very much!
  9. 真是非常高兴,在没有任何预兆的情况下作者更新了705版本!终于,终于,在安卓8.0下成功激活了hi-res!非常感谢作者! 不过,还要反馈一个小问题! 我使用的机器是htc u11,目前系统是安卓8.0。 之前在安卓7.1下,704的所有功能都正常,但是升级到安卓8.0后,出现一个问题:在解锁情况下,如果运行了软件主界面播放歌曲,此时如果返回,让poweramp在后台播放歌曲,然后锁屏,大概3-5秒左右,后台就停止播放了。而且此时使用耳机按键播放,当前的这首歌曲不是从断点开始,而是从头开始的。这次升级到705后,这个问题依旧。 我不晓得是安卓8.0的问题,还是htc u11安卓8.0系统的问题?我周围因为没有使用安卓8.0的,所以没有办法排除。 反馈一下,看作者有没有办法解决,谢谢!!! __________________________________________________ I am very happy that the author has updated the 705 version without any notice! Finally, finally, hi-res was successfully activated under Android 8.0! Thank you very much!However, we must also give feedback on a small problem!The machine I use is htc u11. The current system is Android 8.0.Before Android 7.1, all the features of 704 are normal, but after upgrading to Android 8.0, there is a problem: In the unlocked case, if you run the main interface of the software to play songs, if you return, let Poweramp play the songs in the background. Then lock the screen, about 3-5 seconds, the background will stop playing. And this time using the headset button to play, the current song does not start from the breakpoint, but from scratch. After this upgrade to 705, the problem remains.I don't know if it is an Android 8.0 problem or is it an issue with the htc u11 Android 8.0 system? Because I didn't use Android 8.0 around me, I can't rule it out.Feedback, see the author there is no way to solve, thank you! ! !
  10. 我是来自中国大陆的用户! 首先非常感谢作者,制作了这么优秀的软件,而且是安卓系统独享的!真的非常感谢你!等待了这些年,终于迎来如此大的一次更新,再次感谢作者以及团队的付出! 我的设备是htc u11,目前升级到安卓8.0系统!前几天安装了790测试版,使用了几天,现在反馈两个问题。 问题1:使用蓝牙设备,在连接后无法恢复播放!我特地测试了好几遍。同样的设备和系统下,703/704版本都可以,所以应该不是系统的问题。 问题2:每次暂停播放后,播放列表正在播放的歌曲重置到第一首,而不是暂停前应该排列的位置。 问题3:htc u11使用的高通晓龙835是具备hi-res的,但是在790上无法正确识别! 谢谢!希望能修复。 ———————————————————————————————— Hi!I am a user from mainland China!First of all, thanks very much to the author for producing such excellent software and it is exclusive to Android! Thank you so much! After waiting for these years, we are finally welcoming such a big update. Thanks to the author and the team for their efforts!My device is htc u11, currently upgraded to Android 8.0 system! The 790 beta was installed a few days ago and used for a few days. Now I'll give you two bugs.BUG 1: Using a Bluetooth device, you cannot resume playback after connecting! I have tested it several times. The same device and system, 703/704 version can be, so it should not be a system problem.BUG 2: After each pause, the songs being played by the playlist are reset to the first position instead of the positions that should be arranged before the pause.Thank you! Hope to fix it.
×