[Requests for Hi-Res Support (please state which build of Poweramp you are using)]

On 7/1/2018 at 8:04 AM, beastobadness said:

1. ZTE Axon 7 A2017

2. NFound's AEX 5.6 B12 Oreo custom ROM...latest

3. See attached

Due to recent changes in audio config on said ROM, Poweramp v709 Google play beta is now outputting HiRes through the SD820 DAC wired and BT.

Tested with v790, this did not output HiRes though.

audio_output_policy.conf

 

I can also confirm this. No go with 790, working good with 709.

Axon 7, 8.1.0, latest AEX.

by the way PA 709 reports "Variant: Direct HD" now. 

Hope 790 gets support later on...

[Requests for Hi-Res Support (please state which build of Poweramp you are using)]

3 hours ago, SynekPablo said:

A person's opinion can be neither right nor wrong. That's the special thing about it. Maybe you'll understand that someday.

@Seve-s @SynekPablo You guys are making a mess. We know for sure that the AK4490 is working on custom ROMs and doesn't get switched to the "secondary DAC" (ZTE cust support reports it's the low power DAC inside the 4961 but it doesn't matter at all) even when running Atmos. Supposedly this makes the speakers worse since they should be using the low power DAC.

Let's just cover the facts:

-In Nougat (stock and custom alike) Neutron was able to get direct_pcm output. In Oreo stock it won't be able to.

-Max achievable is 192/24, though they say it's truncated to 16 bit for some reason, but nobody really tried

-Atmos switches to the low power DAC

-AEX has a CAD driver specifically made to be able to change the DAC filters, i.e. it sounds (subjectively) better than stock. It's sort of a custom kernel. Try AEX-O.

 

 

I'll try to dualboot some ROMs later and check if i can make Neutron or Poweramp work on them. Neutron doesn't seem to work on stock O-B01 even though i've tried with every output possible (including direct_pcm)

 

@Seve-s Could you link me to the schematics you were talking about? Just curious...

 

 

Btw I'm Choose an username... on XDA. We probably talked before lol

[Requests for Hi-Res Support (please state which build of Poweramp you are using)]

1 hour ago, owruby said:

Xiaomi Mi max running lineage os 7.1.2.

Hi Res fully working.

Using the new beta. 

BTW, damn this beta is good. 

then why exactly did you post on a hi-res request thread if you have hi-res working?

 

?

[Requests for Hi-Res Support (please state which build of Poweramp you are using)]

On 5/29/2018 at 1:30 PM, maxmp said:

It's quite old device, hard to get now. I have ZTE 7 Mini, which has no Hi-res (while having the same DAC), and ZTE Nubia 17s, which has up to 384khz and works in PA just fine.

From your audio_policy for Axon7 it should work with PA.

What is your Android version and ROM if you have any custom one?

Right now I'm on Stock Oreo (8.0), for the G version. 

It's never worked, even with the older version from here (709?) either on Marshmallow or Nougat. About a month ago the official Oreo 8.0 update got leaked and it also doesn't work with 709 or 790. 790 reports happily that it is working at 192k or whatever you input it, but dumpsys media.audio_flinger says otherwise (outputs through mixer at 48k)

Also, hi-res audio works in Neutron, even in Nougat custom ROMs (All of them are patched to use the AK4490).

One more thing: The stock ROMs have a switch, to select the lower power DAC that's in the AK4961 codec. I don't know if this would interfere with Poweramp at all, but since custom ROMs are seemingly hardcoded to avoid using the 4961, it shouldn't be the problem, right?

 

I'd say it's pretty easy to get a new Axon7 on Europe, a friend almost bought one for 250 euros on Spain. And there are surely some used ones around. 

 

Any file that you need, or test, just tell me

 

 

 

Edit: I've downloaded a 192khz test file (since i formatted a while ago) and took a screenie of media.audio_flinger. no idea if this would help at all

Right when I select OpenSL HD as the output, the volume goes down significantly (I have to crank the volume up to almost full scale) so that might be an indication of the AK4961 kicking in or something, can't be sure at all. 

[Requests for Hi-Res Support (please state which build of Poweramp you are using)]

10 hours ago, Seve-s said:

its name can be audio_policy_configuration.xml

Actually, it was on /vendor/etc instead of just /etc... I don't know. @maxmp that'd probably be useful to have written somewhere in the OP, because I legit had no idea why I was missing the damn file ?

 

Here it is. No wonder it supports 192k

audio_policy.conf

[Requests for Hi-Res Support (please state which build of Poweramp you are using)]

Axon 7, pretty please? AFAIK Poweramp has never been able to output to the AK4996 DAC at more than 48k. Neutron is able to output 192k/24 without too much trouble.

I guess it'd not be easy to output hi-res properly on this phone because ZTE has these weird quirks here and there, but if you need any file from the system i can definitely fetch it for you.

 

edit: on another note, i can't actually find audio_policy.conf under /etc... I have audio_effects.conf though. No idea why, maybe it's 8.0 related, or because i have V4A?