Jump to content

Bracket

Approved Members
  • Posts

    43
  • Joined

  • Last visited

 Content Type 

Profiles

Forums

Blogs

Gallery

Downloads

Poweramp Knowledge Base

База знаний Poweramp

Poweramp知识库

Poweramp Equalizer Knowledge Base

База знаний Poweramp Equalizer

Store

Events

Ideas

Everything posted by Bracket

  1. Everything is back to the state before build 912. The issue must have been in the playlists, I don't know at what stage of exporting/importing that happened. There are/were no duplicate tracks. The remaining incorrect art for some of the playlist titles was repaired when I removed the date from the title of the newly imported playlists. To conclude, I have switched off receiving betas. I remain a Poweramp user as long as there is no better alternative (in interface and sound), but I also continue to regret having to turn to UAPP to obtain the optimum sound from my Fiio M15. Though you have explained it to me a while ago I still fail to see why UAPP manages to extract the best from this DAP and Poweramp does not. Thanks for your time and help Andre.
  2. All songs play normally. After switching off the DAP and restarting the next day Poweramp starts to rescan; no album art or tracks are visible in Artists, All Songs etc. In Playlists no album art is visible for all the titles and most tracks. After the rescan the situation in Artists, All Songs etc have returned to normal. But in Playlists 2 of the 20 have no art for the titles and the vast majority of all the tracks have no art. The tracks in the Playlists do play but the screen stays black in the track vue, so no art. However, in Artist, Genres, All Songs etc the album art show up in all cases, also in track vue. In Playlists, checking Info/Tags of a track that does show art, the section Album Art says: No Embedded Album Art. It is the same for the tracks that do not show art. So there is no difference there. In Playlists I noticed the following: the notation of the tracks is correct in the cases where album art shows up. Where there is no art, the notation is different, namely beginning with the track number and ending with the format (flac, mp3). The choice of list options has the desired effect of the tracks with art but not on those without art. Checking a folder of an album that does show art in Playlists I see a JPG with the album art. Doing the same in case of a track that does not show art I also see such a JPG. On top of that, in Info/Tags of this track, the heading Album Art says: 585x566 JPEG Embedded. Nonetheless the art is not shown in Playlists. Again, the exact same track does produce album art when approached via Artists. Also, the notation is correct when viewed via Artists, Genres etc, so without track number and format. So, it is the notation of the tracks in Playlists that causes the album art to be not found? But why is that not an obstacle in the case of Artists, Genres etc? In Settings/Playlists the Resolve Playlist Entries was checked/on. In previous builds, when I exported Playlists to the Playlists folder on the internal storage of the DAP, I could see the files when the DAP was connected to the PC via USB. That was the way I backed up the Playlists: I copied those files to store them on the PC. This time however the folder says it is empty, whereas when I check on the DAP via ES File Explorer I do see all the Playlist files in that folder. I managed to backup via the network instead. Since nothing worked I deleted all Playlists from Poweramp on the DAP and reimported them from the expanded export settings file I had created after updating to build 912. I have done this before, without success. This time it did work. The Playlists now show the artwork again. In the titles as well as in the tracks. The only inconvenience is that each playlist title contains the import date. I had reached this point at the previous try. I then renamed all 20 playlists, deleting that date. At that point the problems started as described in a previous post. Not all the art that was attached to a playlist title has reappeared, but other art from the same playlist. So, we're back to square one. Many hours later. I described what I encountered as I went along and I kept it in this post for your information.
  3. Album art shows up in All Songs. Also in most Playlists titles, though some have disappeared. The tracks inside the playlists do NOT show album art anymore (exceptions aside) though the same tracks do show the art when I approach them via all songs or artists etc.
  4. I have submitted a reply twice in the past few days but I don't see them here. I am not going to retype everything. In short: I am left disillusioned with Poweramp. Betas may have issues but this time it's a disaster. Many of the album covers in my playlists have gone (build 914). I am wasting hours and hours trying to fix things. My idea is that Poweramp has become too complex, when I look at all the issues that users have (many won't bother writing). But the basics, the quality of the sound, are not taken care of, at least in my case with the Fiio M15. Why can UAPP provide real high resolution on my DAP and Poweramp can't? If it were not for the better interface Poweramp has I would have turned to UAPP already. They are improving though and the turning point is not far away.
  5. Hi Andre The updates are presented to me automatically via the Play Store. I have not seen any mention of it being a beta before I tapped on update. Not in the name of the file either. By now I retraced how to leave the beta tester program. After doing the update to 912 I (luckily!) directly used the expanded export settings. So having rolled back to build 911 and seen that a lot was missing I imported these settings, without succes (it was not meant to be I now understand). Because this did not work I did the update to 912 again and this time succesfully reimported the settings, including the playlists. Everything came back thank god. Only the playlists now all have the date and time added to their name so I will have to manually correct each and every one of them. Unfortunately, this lasted not very long. Poweramp stopped. Restart brought me back to where I came from and I had to do a rescan (of the music on the external card and the playlist folder in the internal storage). When this was finished I tapped on the android back button, briefly saw an album cover and the unmodified layout and then the black screen with the mention "-Doesn't look like anything to me". Back to square one. Another rescan. The lists seems to appear in the way I set up. The single track view and other skin settings though are not. Poweramp stops when I go to another app. When I ignore -close app- I can return to it and everything is still there. What you said about revoking permissions, how do I do that?
  6. Fiio M15 with Android 7. I rolled back to 911. Now I lost almost all of my playlists. A complete disaster!
  7. Opening the app it says "-Doesn't look like anything to me". Each time I have to build/scan the entire database. Images are empty, tracks are empty. Ater a while Poweramp has stopped. Reinstalling previous build 911: App not installed, The package appears to be corrupt. What do I do? Everything worked fine until I downloaded the latest build.
  8. That would indeed make life easier Andre. Are these the outlines of a new project? What is the aim of your message? Will there be such a backup/restore function in the near future?
  9. Since request and audio specs were sent seperately the last time, I'd like to ask again for HiRes output for the Fiio M15, this time with the audio details attached. Would you please please make this possible? The Poweramp interface is the best there is, but the sound is best with UAPP. Do they have a secret weapon or can Poweramp make the Fiio M15's HiRes output just as good? Android 7.0 (DAC chip AKM 2x AK4499EQ) 09:29:49.243 v3-build-883-arm64-play Device: Android Samsung Electronics Co., Ltd. FiiO M15 M15 maestro7872 "samsungexynos7872" maestro7872 1.0.3 [arm64-v8a, armeabi-v7a, armeabi] reading=/system/etc/audio_policy.conf has outputs_primary, sampling_rates=44100|48000|88200|96000|176400|192000|352800|384000 has outputs/primary formats=AUDIO_FORMAT_PCM_16_BIT| AUDIO_FORMAT_PCM_8_24_BIT |AUDIO_FORMAT_PCM_24_BIT has primary sampling_rates=44100|48000|88200|96000|176400|192000|352800|384000 has primary formats=AUDIO_FORMAT_PCM_16_BIT| AUDIO_FORMAT_PCM_8_24_BIT |AUDIO_FORMAT_PCM_24_BIT has usb has usb outputs has usb_device, sampling_rates=44100|48000|88200|96000|176400|192000|352800|384000|705600|768000 rate=44100 rate=48000 rate=88200 has usb formats=AUDIO_FORMAT_PCM_16_BIT| AUDIO_FORMAT_PCM_8_24_BIT |AUDIO_FORMAT_PCM_24_BIT USB can handle Hi-Res - sdk=24 OK flags=0x900003400000000 FLAG_VARIANT_MIXED_HIRES FLAG_SUPPORTS_PCM_8_24 FLAG_SUPPORTS_USB FLAG_SUPPORTS_FLT_DYN_RANGE INTERNAL_OUTPUT_FLAG_SR_384K INTERNAL_OUTPUT_FLAG_SR_352K INTERNAL_OUTPUT_FLAG_SR_192K INTERNAL_OUTPUT_FLAG_SR_176K INTERNAL_OUTPUT_FLAG_SR_96K INTERNAL_OUTPUT_FLAG_SR_88K INTERNAL_OUTPUT_FLAG_SR_48K INTERNAL_OUTPUT_FLAG_SR_44K ...
  10. I know you have so much on your plate but I really have to ask since Poweramp sounds awful on my new DAP: is HiRes for the Fiio M15 in the pipeline somewhere? Any idea when this might come about? Thanks.
  11. Fiio M15 with Android 7.0 DAC AK4499EQ x 2 XMOS 768kHz/32 bit High-Res output can be made active but the sound is distorted in the lows and especially with the letter S. No matter what settings/sample rates etc I choose. You made the previous Fiio M11 sound great. Hopefully you can do the same for the Fiio M15. Thanks. (Sorry I have no idea where/how to find the specific Android files you ask for.)
  12. This is a request for the Pioneer XDP-100R Android 5.1.1 stock rom Kernel version 3.4.0 This DAP must do HiRes since the standard Pioneer Music app as well as apps like Neutron and UAPP also provide it. Audio policy Pioneer.txt Build prop Pioneer.txt
  13. Almost 3 years (!) ago you asked me to send the details of my DAP, so that HiRes output could be facilitated on the Pioneer XDP-100R that I have.

    I have waited for the arrival of Version 3 of your software. I had expected it would finally make it possible.

    But no.

    I still get the message FAILED: Hi-Res OUTPUT. Every single time I start Poweramp. I am using build 816.

    Meanwhile I downloaded USB Audio Player PRO. While it lacks many elements of Poweramp, it does provide HiRes output for my DAP. The same goes for the app that came with the DAP. But sofar I prefer using Poweramp.

    May I ask you again if you can make HiRes output work on the Pioneer XDP-100R?

    Please?

    1. Bracket

      Bracket

      Should I post some place else in order to get a reply?

  14. Hi Andrew, Max.
    Build 799.
    I am using V2 since early 2016. I like the looks of V3 and I appreciate the enormous amount of work that has be done. But I am very disappointed to continue seeing: HiRes playback not supported, falling back to default (or words to that effect). My DAP is the Pioneer XDP-100R with Android 5.1. I have asked to the HiRes support years ago. Am I missing something or does your player still not do HiRes on my DAP?
    Shuffle is a much used function, clearly. Changing it from one version to another is really not a good idea. Like putting the hand brake in your car to the other side of the wheel. Playing from a genre I cannot anymore long press to make my choice, as in V2, but I have to toggle through the options, making the music jump each time. Very awkward. Before I could long press a genre to choose from a shuffle menu. Now I first have to tap on the genre, then tap on an album, then tap on any song (even if it is one I don't want to hear), then long press the shuffle icon. How it is an improvement?
    The lack of HiRes and the hassle with shuffle are enough to say goodbye to V3. And maybe even to Poweramp. Below are several issues that are less important, though they also spoil the experience working with Poweramp.
    I checked « show album on Android lock screen », but what happens is the opposite: it disappears! Everything else remains. While it should be just the other way around.
    Progress bar. Ugly. With so many other things one can switch on or off, why not this as well? You refer to 3rd party skins but in the settings it says « no 3rd party skins found ». Yes, I can choose for the seekbar to be static, but I prefer to have no seekbar at all (or the simple one from V2).
    The text across the album art is ugly.
    Album art. Why is it not as before, covering the whole screen?
    Choosing full screen gives me a completely black screen (visualization is off) in stead of the album art.
    To finish, I am not one of those people who complained about the delays all the time. But for me, after patiently waiting for two years, V3 is not a step forward. Please tell me the issues I mentioned are going to mended soon.
    Thanks,
    George
  15. Hi Andre, Thanks for checking if HiRes can be added in Poweramp for the great Pioneer xdp-100r. https://drive.google.com/open?id=12q2UqLHdw0XmPWsajbJKxbwuaS_pGYMK5_XndGz07no https://drive.google.com/open?id=1ScfkCtdZG3TTl8q-4aWdeKSvsUSe8bERn5obsX6ntBQ https://drive.google.com/open?id=1QzjgLBwnRfR0nwE0pRxCl0kb7PpUDF3CRW7TQ-9q-lc https://drive.google.com/open?id=1i3qdIHmlXgJ3mU6qkebbFgVXYT2IG07SsFY3KPH81eg
  16. Could you tell me where to find these files? I can't locate them on my device. I have asked Pioneer but they do not respond. Thanks
  17. Pioneer XDP-100R Android 5.1.1 Processor Qualcomm APQ8074PRO-AB This is a dedicated HiRes audio player that plays all possible HiRes files through its own Music app. However, some of these do not play through Poweramp, a player that I find much better than the standard Music player and that I use all the time. These files are (I give the content of what is in the tag info) : AIFF at 192 kHz 24 bit 9216 kbps does not play at all (I see the warning : failed to play file) PCM_S24BE 96kHz 32 bit 4608 kbps does play but with constant static (dvc on or off) PCM_S24BE 88.2kHz 32 bit 4233 kbps does play but with constant static (dvc on or off) PCM_S24BE 48kHz 32 bit 2304 kbps however does play correctly
×
×
  • Create New...