Jump to content

Aller2TeaM

Approved Members
  • Posts

    42
  • Joined

  • Last visited

 Content Type 

Profiles

Forums

Blogs

Gallery

Downloads

Poweramp Knowledge Base

База знаний Poweramp

Poweramp知识库

Poweramp Equalizer Knowledge Base

База знаний Poweramp Equalizer

Store

Events

Ideas

Posts posted by Aller2TeaM

  1. 4 hours ago, maxmp said:

    @Aller2TeaM Unfortunately on Android the Visualizer component can't know the output sampling rate due to the lacky APIs, bugs, and general component engineering oversight, thus hi-res sample rates won't be properly visualized. (The component was introduced in Android 2.x days when no hi-res audio existed for Android devices, and the code was never updated).

    Poweramp player doesn't use the Visualizer component, so it's not affected.

    Got it. Not a big problem for me, I just noticed. Can't wait for new releases :)

  2. 20 hours ago, maxmp said:

    Thanks for the report. #2 looks like a DVC issue, though it’s quite stable on my Samsungs. I’ll try to test on the exactly the same device+ROM.

    #2 - Disabling DVC helped, yea, thanks. Hope DVC can be fixed.

    P.S. my friend noticed, that bug #2 appears with tracks switching only when the screen is on (not appears eg when switching tracks with buttons on headset with screen turned off).

  3. Доброго дня, Макс!

    1) Есть некоторый баг, проявляющийся при включенном компрессоре. Когда звук в приложении ставится на паузу/останавливается, появляется дребезжаще-пищащий звук повторяющийся по темпу и увеличивающийся по громкости. Доходя до максимальной громкости, звук обрывается. Чем-то похоже на прерывистую возрастающую петлю (аля микрофон рядом с динамиком воспроизводящим звук с этого микрофона).

    SG N10+ Exynos (сток, Android 11, OneUI 3.1, от мая 2021)

    Точно проявляется при выводе со встроенного динамика и через Bluetooth.

    2) Также, обнаружил на другом устройстве баг PA EQ с Deezer-ом. SGS 8+, Exynos (сток, Android 9, OneUI 1.0, от апреля 2021). Периодически, при переключении треков, трек _вроде бы_ воспроизводится, но звука на Bluetooth наушники не выводится. Если поперематывать, то в момент перемотки, звук на доли секунды появляется. Приостановка трека и последующий запуск помогают. Переход на следующий/предыдущий треки помогает (звук возобновляется). Опции устранения проблем для приложения в PA EQ не помогают. Могу записать на видео, как это выглядит, если необходимо.

    upd. Баг не только с BT гарнитурой, с проводом и встроенным динамиком проблема та же. Простое выключение эквалайзера, в самом PA EQ не помогает. Помогает только отключение захвата приложения Deezer в настройках PA EQ. 

     

    Hello, Max!

    1) There's a bug, that's showing itself when compressor's on. When the sound in apps stopped/paused, appears an audio artifact, sounding like a sound loop, which cuts itself on max volume.

    2) Also found a bug in PA EQ with Deezer on SGS 8, Exynos. Spontaneously, when switching tracks, some of them deny to outputting audio. In PA EQ audio visualizer at these moments show nothing. Compatibility options in PA EQ on Deezer app settings doesn't gave any result.

  4. 3 hours ago, reverbel said:

    Hello,

    I am a user of the Poweramp Player app. I installed Poweramp Equalizer build-908-arm64-play to use it with the Poweramp Player app, while the parametric equalizer is not ported to the player app. 

    The parametric equalizer looks very good! @maxmp: Thanks for your great work! I have already purchased the premium version of the EQ app, in order to support further development. 

    The EQ app works fine with YouTube Music on my phone. However, I was not able to make it work with the Poweramp Player app.

    The player and EQ  apps are running on a Samsung Galaxy S10+ with Android 11. I have already disabled DVC and enabled MusicFX in Poweramp Player, granted DUMP and Notification Listener permissions to Poweramp EQ, turned on the experimental "Enable Player Tracking" feature of the EQ app, and turned on "Disable absolute volume" under "Default USB configuration" in Android Developer options. Is there something else I should do?

    Thanks!

    I had tried the same.

    It also requires for you to enable MusicFX on volume/tempo/balance tab in PA Player.

    And thanks, I get now how to using PA Eq's compressor in PA Player. I hope - the solution 'll be temporal.

  5. 5 hours ago, andrewilley said:

    The folder you need to save your milkdrop preset files into on fresh Android 11 Poweramp installs is Android/data/com.maxmpz.audioplayer/milk_presets

    Andre

    Android's 11 OneUI doesn't allow me to get into that folder directly from phone. But from PC - it allows. That is what I mean :)

  6. 26 minutes ago, maxmp said:

    @Aller2TeaM this is minor ui bug, the actual value is visible to the left. Thanks for the report.

    Thanks for your answer!

    ^^ Oh, if there's so nice oportunity

    I didn't found Envelope/Cascade switcher in Player.

    Aaand, are you planing to add Poweramp Equalizer Compressor into the Player app?

    Deezer is beatifull with Equalizer app (and it's Compressor in particular), but not all recordings can be found in apps like this. There's a lot of what can be played locally only.

    P.S. It seems, that there's left an oportunity for adding 3rd prty milk presets on Android 10+ (SG Note 10+, Android 11). From PC, the necessary directories are visible. Is this info needs to be added into a 3-rd party pressets settings section?

  7. 2 hours ago, maxmp said:

    Build 910:

    • preset selection won't override "No Equ/Tone" option anymore
    • bug fixes and stability improvements
    • translations updates

    Oh, just in time ^^

    Max, there's an artifact or a bug at Resampler's settings page.

    The "Resampler Cutoff Frequency Ratio" regulator has a constant "0.0" below it.

    Or is it a dummy for some future feature?

  8. 1 hour ago, andrewilley said:

    Ah, we might be talking at cross-purposes here.

    ReplayGain is not something that an audio player creates, it's a very specific term for a few bytes of embedded metadata that were saved inside an audio file during its creation or editing. This data merely indicates the maximum peak audio level that exists anywhere within that file.

    So for example 'Track A' might have a loud bit that hits 100% digital volume, while 'Track B' may be much more conservatively recorded and peak at -20dB below that maximum level. When a player replays those files, it tries to match the peak levels so they both sound similar to the ear - for example to make them both peak at -10dB it would reproduce Track A about 10dB quieter, and Track B would be played about 10dB louder. That value would be applied to the whole track, so the dynamic range isn't affected and the entire track is made louder or quieter.

    The 'Replay Gain Preamp' setting which you mentioned in your original post simply adjusts the player's overall target loudness. The original ReplayGain spec default is to process all files so they peak at -14dB, but I think PA may use a slightly louder target value by default. You can adjust that overall target level up or down using the RG Preamp control if you wish.
     

    There are lots of other more dynamic level adjustment systems - such as Normalisation, Automatic Gain Control (AGC), Compressors, etc - which work 'on the fly'. They effectively listen to the music while it plays and decide "this section is a bit quiet, I'll turn the volume up a bit", and later there might be a very loud section for which they need to lower the volume. They basically continually adjust the volume so the dynamic range (the gap between the loudest and quietest sounds) is reduced. This process changes the musical range from that in the original recording, so purists may not like it, but it does make audio easier to hear in noisy environments.

    The main PA music player app does not currently offer any of these on-the-fly level adjustment features, although as I said earlier the stand-alone EQ module does have a Compressor.

    Andre

    Correct. Hmm, probably, I needed to name this topic aka "To port compressor features from EQ to Player"?

  9. 2 hours ago, andrewilley said:

    @John Titor Could be, but the original post did seem to be asking about manually adjusting the preamp gain per file, rather than creating the actual embedded ReplayGain data which really requires more of a file editing/management tool instead of a pure music player. Even foobar2000 doesn't auto-embed ReplayGain data into music files, you need to request to scan the file(s) manually first and then click to Update the tags.

    As you say, all of this is quite different from Normalise/AGC/Compressor functionality, which can adjust the output gain 'on the fly' during playback. It would be nice to have the Compressor feature from the stand-alone EQ app ported over into the main player app at some point too.

    Andre 

    Actually no, what I mean is to add only a RG preamp "encoders/valcoders" like a volume, balance, tempo, etc. have.
    Pretty similar feature presents in Poweramp EQ, in compressor settings.

    Speaking of... wouldn't the Poweramp Equalizer's compressor looking incredibly good in Poweramp Player?

  10. 6 hours ago, andrewilley said:

    Your shouldn't ever need to change the RG preamp setting on a per-song / per-album basis. RG always aims to achieve the same peak level for all properly encoded music, and you can use the pre-amp setting to indicate what you would like that standard target level to be.

    Andre

    That's the point. Not all "properly encoded" music using by the most of users. What you mean is how it should be, in this - we'll agree, but this is not what we really have now. Most of music isn't "properly encoded". And in this, I'm pretty sure, most of users would agreed with me.

  11. 54 minutes ago, Fretman said:

    If I buy the Poweramp Player app, does it offer the same features as the Poweramp Equalizer app?  Or does the Poweramp Equalizer app have more features than what is bundled with the Poweramp Player app.  Thanks. 

    Aaaahm. This apps is completely different in their purposes.

    Poweramp Equalizer offers to use it with apps that can use it (sry for quibble) (eg Spotify, Deezer, possible YouTube), to modificating with equalizer their (apps) output sound.

    Poweramp Player - is a player with equalizer. It can't modificate the sound of other apps.

    You can test them, they both have a trial period.

  12. Awesome!

    Maxim, have a nice day! Just now I noticed: when you press the button to select the visualization display, the tooltip does not allow you to immediately switch to another mode, overlapping the button. To hit the button is surprisingly problematic, as if the interaction area of the hint is larger than itself.

    Note 10+ if that changes anything.

    Quote

    Как-то так

    907158407_Screenshot_20210630-111628_PowerampEqualizer.thumb.jpg.6ce9b0478a2f8aea08084590bed519b2.jpg

     

    By the way, is peak display enabled by default?

  13. Errrr... Is it somehow possible in some incredulously way for it?

    SG S7 Flat

    Максим, я слегка в растерянности. На портированной OneUI 2.1 Q ROM, помнится тоже были эти режимы доступны, но тогда, при попытке их использовать, появлялся ужасный треск вместо звука. Здесь же - позволяет в Samsung UHQA включить 44/48/96 (16bit) и 352/384 (32bit). UHQA доступен только с отключенным DVC на упомянутых режимах (иначе отбрасывает на OpenSL).

    Можешь объяснить - это баг или я узнаю что-то новое для себя о S7?

    P.S. В идеале - хотелось бы включить 192/24 (с которого отбрасывает на OpenSL), но я (полагаю что) понимаю, что тут проблема в работе прошивки, а не Poweramp.

    Quote

    Screenshot_20210504-154710_Poweramp.thumb.png.6b3fac216e8dddd9759516b532286fbc.pngScreenshot_20210504-154801_Settings.thumb.png.e797ca576cdaa3e87938e2dc84808c85.pngScreenshot_20210504-154830_Settings.thumb.png.e7201b7a8d69b577a5fd245c0719d7e1.png

     

     

     

  14. Oh my gosh. We finally got it! Already start testing new equalizer in Poweramp player (not just functional, I waited long for opportunity to raise also 20khz, but with that, the new equalizer is _looking_ even better then "old". Also, I granted permission to change tracks by volume buttons (in Poweramp player). Extraordinary convenient! I don't see any bugs (for now).

     

    Thanks a lot!

     

    Also I'm wait for opportunity to buy Poweramp Equalizer (for Spotify) - great work deserves money.

×
×
  • Create New...