Jump to content


  • Content Count

  • Joined

  • Last visited

 Content Type 





Knowledge Base

База знаний


Everything posted by andrewilley

  1. Sorry, you didn't mention Bluetooth in your original message, when you said you had new high-quality headphones, I had assumed they were wired. Andre
  2. You can simply purchase from the website, and install the latest APK files from the Downloads tab here. No need to uninstall the trial version, the licence simply unlocks it permanently. When you receive the confirmation email, in Poweramp Settings use 'Already Purchased?' > 'Website', and type in the same Google or other email account that you registered with, and the Order ID. You will need an internet connection on the device for it to initially validate the email address though, but Google Play and gapps are not required any more. Andre
  3. Yes, the latest I see on Play Store (UK) is v58, dated 8 Feb. Didn't even know you'd released 59. Andre
  4. Not seen it either, v58 (8 Feb) is latest in my UK Play Store. I think it might be the overall size of the albumart thumbnails that is causing my concern then. Yours are larger than the default skin, which is generally a great improvement as the artwork is much clearer to see. However I guess they might look better just a tad smaller to allow a bit more breathing space between them, and with more consistent horizontal margins to avoid eating too much into the available text space. Just a personal preference here, feel free to ignore if you don't agree. Here are examples of the three List views to illustrate, showing the middle size sits too tightly against the margin, while the smallest and largest ones are a bit gappy. Somewhere in between lies perfection. [Edit: Just noticed the text spacing (leading) seems to vary somewhat between the three views too, with the middle view being preferable as it more clearly segregates song's content. In Compact view, the leading between the 'Title' and the 'Artist/Album' line is almost as large as the gap between each song.] The EQ comment was not about the width of each bar by the way. I don't mind that you have to scroll over to see the final few frequencies on smaller screens - although seeing all of them on one screenful for larger devices would admittedly be nice as long as they aren't too squashed. However the vertical lines/tracks (that ones that the slider thumbs move up and down along) are missing. Each vertical line only appears - in a rather noticeable orange colour - when you move one of the sliders up or down. Here's your skin versus the PA default: Andre
  5. As I said above, the tag convention that Poweramp (and most music software) uses to represent 'Album Artist' is TPE2, which in the original ID3v2 specs was indeed referred to as "Band/orchestra/accompaniment". There was no specific Album Artist tag as far as I know, hence TPE2 was generally adopted for that purpose - see https://help.mp3tag.de/main_tags.html. If you check your files using programs like TagScanner, MP3tag, foobar2000, VLC, etc, then TPE2 (which you are still using to represent band/orchestra) is what you will see displayed under the label Album Artist. What software are you using that shows Album Artist as a separate item from Band/Orchestra? I wonder what underlying tag it is using to store Album Artist in? Andre
  6. You haven't had an update recently have you? Try resetting Settings > Audio > Output back to defaults. Andre
  7. DVC simply gives Poweramp more direct access to the audio system, rather than passing too much control via the device's firmware. Normally, with DVC enable it tends to be louder as PA can better control the headroom in the audio chain. With DVC off, PA will normally not send out quite such a high level to avoid potential distortion. You can influence this by using the preamp gain in the EQ settings though. Andre
  8. I find the opposite, audio has often reset itself far too low when I first start Android Auto, and I have to turn the output on the phone back up to maximum (same as I do with Bluetooth). Andre
  9. Yes, that's how I always suggested people do it back in the Poweramp v2 days, and it's how I originally titled my own album rips too. Doesn't solve albums which genuinely and correctly have the exact same title though (such as my example of "Up"). So to make several songs appear as part of the same album in PA, both the Album Title and Album Artist tags should be matches in all the files. If no Album Artist tags are present, then it will try to use Album Title and Track Artist to build the contents of an album - which can cause things like various-artists collections to become split, as you pointed out. There are some extra controls in Settings > Library > Lists (such as 'Join Albums'). Poweramp uses the following generally accepted mapping conventions when reading ID3v2 tags (for more info see https://help.mp3tag.de/main_tags.html ) : Track Title: TIT2 (aka "Title/songname/content description") Album Title: TALB (aka "Album/Movie/Show title") Track Artist: TPE1 (aka "Lead performer(s)/Soloist(s)") Album Artist: TPE2 (aka "Band/orchestra/accompaniment") Andre
  10. Multiple streams in one file are really more of a video (mkv) feature, where you can select between alternate soundtracks / commentary tracks. I've never really thought about encoding multiple separate songs into the same timecode. Andre
  11. That is what the Album Artist field is for, as you can't guarantee that any given Album Title will be unique. This fixed an issue which occurred Poweramp v2 where all songs with the same album title, but by different artists, were grouped as one album - so you could find a huge "Greatest Hits" album with mixed up tracks by Queen, Jason Donovan, Fleetwood Mac, and hundreds more. Or an album entitled "Up" would group together the same titled releases by R.E.M., Peter Gabriel and Shania Twain - plus maybe the Pixar film soundtrack for good measure. Andre
  12. If you put image files into a folder intended for music albums, any such images can be assumed to be meant to be used as album art. That only applies if your music files don't have properly embedded artwork already of course. You can adjust the default behaviour in Settings > Album Art. Andre
  13. Poweramp does not change frequencies of music during playback (assuming you are meaning changing the playback pitch). Higher resolution sampling rates and frequency response in the output stages can be changed in Settings > Audio > Output, if that's what you are asking for playback of high-res soruce material - e.g. for 192kHz, 24-bit audio files. Andre
  14. Poweramp does not currently support the handling of multiple artists / band names within one 'Artist' tag. The whole string is processed as a single name, which is how it will be treated in the Artists list. Even if at some point multiple artists are supported, by default things like "feat.", "&" or "and" would not act as a separators, nor would comma or slash (otherwise band names like "Crosby, Stills and Nash", "AC/DC", "Adam & the Ants" would get broken). If it ever does get supported, the default separators would most likely be as per the Genre tag, so "//"and ";" by default, with the ability to define your own. I can see some merit to adding "feat." and "feat" to that list though, as much as I personally hate that particular current-trend terminology. I'll move this to Feature Requests as suggested. Andre
  15. How did you get to that view, and is it repeatable? Andre
  16. I believe the display format is basically up to the Android Auto app, not Poweramp. Andre
  17. If you can't use Google Play, then you can't buy anything that can only be purchased from there - including skins. The app developer could agree to build you a special one-off APK version, and sell it to you directly, but that would be their decision of course. Possibly some free APKs might be able to be downloaded manually in that form? Remember that some Fiio devices have very unusual screen aspect ratios, so you may find skins do not look very good on them unless the dev has optimised them accordingly. Andre
  18. Do you have the 'top level' of your music folders selected in Settings > Library > Music Folders ? If so, then all subfolders within that folder should also be scanned, regardless of whether there are more subfolders with other contents as the non-music files should be ignored. Try a FULL Rescan (in Settings > Library) after checking that setting. You will only be able to access your music via the Albums option if the files are properly tagged, otherwise you'd need to use Folders view. Andre
  19. Possibly, not sure whether PA reads Album Artist data for pseudo-tracks created by CUE files or not. Personally, I never use CUE files anyway, as it just seems to add a needless layer of complexity for something to go wrong. I just make sure all my individual music files are tagged correctly when I rip or download them, and let PA do the organising. And if I want to create new groupings, I use Playlists. Andre
  20. I'm sure there is no technical reason why this info can't be displayed in all Categories, it's just something that @maxmp didn't get around to when initially adding the feature. Hopefully he'll be able to revisit it sometime soon. Andre
  21. You would need to have Google Play installed on your device in order to buy and download this, and a live internet connection of course. Andre
  22. Most likely issues are related to Scoped Storage (darn you Google, you are not meant to behave like Apple!). PA can read playlists from any storage, assuming it has access permission for it. So if your music is stored on your SD Card and is scanned correctly, then any .M3U etc files that are located in the same directory locations will also be read (this can be changed in Settings > Library > Music Folders if you want to add new locations). There is no need to import, they will be scanned automatically. If you move files/folders around, then any playlist which points to the old directory location will most likely fail to find the music after you have moved it. Think of it like a physical library of books - there may be an index card that says a particular book is stored in room 3, on rack 12, shelf 5; if someone later moves that book into another room (without updating the index card too) then it won't be possible for anyone to find the book any more. You can use the Rescan / Resolve Playlists option in the three-dots menu for the Playlists category to remove any entries for which files no longer exist. The Artist/Album re-sort option for playlists does not sort songs by Track# order, it sorts them alphabetically like it did for the artist and album names. You may be able to use external apps such as New Playlist Manager if you want more flexibility though. Andre
  23. As far as I know it shouldn't. I'm guessing that there may be at least one song file in there that is flagged with an Album Artist tag. You'd need to drill down from the Album Artists view into 'Adele', and whatever album name is visible to see the actual track, and then look at Info/Tags. Andre
  24. If you are using the Album Artists category, your tracks need to have Album Artist tags. Otherwise, use regular Artist or Album categories. Andre
  • Create New...