DerWahreHansWurst

After using the car BT, JBL wont autoconnect again... I will keep JBL still, they fit the best for me. Seems to be a problem with the smartphone BT depending on the used device. Poweramp seems to make it even worse, even though its not PA´s fault. Any ideas though, even if its not a Poweramp related problem?

So, now when i was shopping and the smartphone connected to car BT automatically, PA starts and stops the music in the car, as it should. But after that, the JBL Buds will not automatically connect with my smartphone, just like the other times. In conclusion: i dont think it´s a PA problem, but i guess PA makes it even more complicated in this 2 cases. I will keep the JBL Buds, they fit the best for me. Maybe any tips how to solve the BT connection problem, even though it has nothing to do with Poweramp?

I am 100% sure that all the 6 tested in ears had this auto-pause feature and it worked properly. Freebuds Pro have the feature too. Deactivating the autopause in the AI App, fixes the speaker problem. But now the sound on the in ears, sounds like crap. (also it is a must have feature for me) I also tried all the tips from these to threads, without success:

There is this weird thing, that when i used for e.g. the JBL, then use my car and after that want to use the JBL again, their wont autoconnect/resume properly. I will make the following: reset and clear all the stuff, connect my JBL and use them 1-3 times. After that i will connect to my car and get some groceries. And then i will check, if the JBL still work and also post the PA comments here.

Ok i deleted all the apps, that could possibly have access to bluetooth, i cleared cache and data, restarted the phone, reconnected freebuds -> wont work I noted the following: BT on phone is turned on, autoplay in PA is turned on. I open the case and hold the buds in my hand: PA will start the music, but plays it on the smartphone speaker.Only when i put the bud into my ear, PA will switch to bluetooth audio... weird, but seems to be a Huawei Free Bud problem. Then putting them back in the case. I cleared last processed commands and did what i wrote above, here is the results: ================== 11:03:18.973 BTReceiver headset event connection BT=true am mode=0 HUAWEI FreeBuds Pro ================== 11:03:18.973 BTReceiver RESUME resume_on_bt delay=500 ================== 11:03:19.503 PlayerService RESUME from BTReceiver resumePlaying ================== 11:03:25.267 PlayerService onRoutingChanged newDevice=bt oldDevice=speaker ================== 11:03:25.267 PlayerService reloadPipeline allowPlaying=true forceResume=false state after reload=1 ================== 11:03:28.394 HeadsetPlugReceiver headset event disconnection BT=false am mode=0 no_keep_notif_on_dscn=false ================== 11:03:28.394 HeadsetPlugReceiver cmd_player_pause_playing ================== 11:03:28.516 PSMediaButtonReceiver android.intent.action.MEDIA_BUTTON KEYCODE_MEDIA_PAUSE ACTION_DOWN name=Virtual source=0x0 sources=0x301 virt=true repeat=0 actionTime=1041424 sourcePak=com.android.bluetooth isAvrcp IGNORED isNotButtonPress=false enable_headset_controls=false ================== 11:03:28.569 PSMediaButtonReceiver android.intent.action.MEDIA_BUTTON KEYCODE_MEDIA_PAUSE ACTION_UP name=Virtual source=0x0 sources=0x301 virt=true repeat=0 actionTime=1041476 sourcePak=com.android.bluetooth isAvrcp IGNORED isNotButtonPress=false enable_headset_controls=false ================== 11:03:32.365 BTReceiver headset event disconnection BT=true am mode=0 HUAWEI FreeBuds Pro no_keep_notif_on_dscn=false ================== 11:03:32.528 PlayerService onRoutingChanged newDevice=speaker oldDevice=bt ================== 11:03:32.528 PlayerService reloadPipeline allowPlaying=false forceResume=false state after reload=2 I did the same procedure, but with the JBL Live Pro 2, see the results: ================== 11:08:41.892 BTReceiver headset event connection BT=true am mode=0 JBL LIVE PRO 2 TWS ================== 11:08:41.892 BTReceiver RESUME resume_on_bt delay=500 ================== 11:08:42.464 PlayerService RESUME from BTReceiver resumePlaying ================== 11:08:50.462 PSMediaButtonReceiver android.intent.action.MEDIA_BUTTON KEYCODE_MEDIA_PAUSE ACTION_DOWN name=Virtual source=0x0 sources=0x301 virt=true repeat=0 actionTime=1363369 sourcePak=com.android.bluetooth isAvrcp IGNORED isNotButtonPress=false enable_headset_controls=false ================== 11:08:50.613 PSMediaButtonReceiver android.intent.action.MEDIA_BUTTON KEYCODE_MEDIA_PAUSE ACTION_UP name=Virtual source=0x0 sources=0x301 virt=true repeat=0 actionTime=1363520 sourcePak=com.android.bluetooth isAvrcp IGNORED isNotButtonPress=false enable_headset_controls=false ================== 11:08:54.273 BTReceiver headset event disconnection BT=true am mode=0 JBL LIVE PRO 2 TWS no_keep_notif_on_dscn=false ================== 11:08:54.273 BTReceiver cmd_player_pause_playing ================== 11:08:54.306 HeadsetPlugReceiver headset event disconnection BT=false am mode=0 no_keep_notif_on_dscn=false ================== 11:08:58.440 PlayerService onRoutingChanged newDevice=speaker oldDevice=bt ================== 11:08:58.440 PlayerService reloadPipeline allowPlaying=false forceResume=false state after reload=2

I have tested 6 different in ears in total, plus my car. It only occurs on two of them, but only with the Poweramp Option turned on. Are you sure about this? The error sound on the Huawei Freebuds Pro only occur, when the option is turned on. In the exact moment i disable it, no more error sound. Can it be, that these two devices distract each other on software site?

I have an issue with Poweramp on my Mate 20 Pro. I hvae tested many true wireless in ear speakers so far, to find the one for me. My choice, the JBL Live Pro 2, came up with a problem. They would not automatically conncet, when put out of the box. Now, after testing many in ears, i had a similar problem with the Huawei Free Buds Pro. They would conncet the first time, but after that, everytime i open the box, an error sound appears repeatedly on the in ears. In the exact same moment i turn off bt on the smartphone, the sound stops. So i guess, there is a problem with the auto connection. When turning off the "autoplay when connected to bluetooth" option (dont know the english words for this function), the in ears will automatically connect to my smartphone. BUT the music won´t start. I´d say it is a problem with this setting in Poweramp, but what can i do? I just deleted cache and files of the BT and Poweramp App. I deleted all connected BT devices. I used the JBL and Huawei Apps, even updated the in ears. Also updated the Poweramp App...