andrewilley Posted May 31, 2016 Share Posted May 31, 2016 4 hours ago, Oshinigami said: While I wish this post was all about praise, I do have 2 major issues (although the first could be an issue with my phone rather than the app itself). 1. The spectrum analyser visualisations do not show left and right channels, they show a combined display with bass (low) frequencies on the left and high-end frequencies on the right. To adjust the overall Left-Right audio balance, use the Balance knob in the Tone control panel (although unless your equipment has a fault, or you need to adjust for your ears or for ambient room acoustics, that shouldn't normally be necessary). 2. Does this happen on the release build of PA as well as the alpha-test version? The alpha test release uses a new audio engine which is of course still in the testing phase at the moment. You don't mention what hardware and Android version you are using by the way. Andre Link to comment Share on other sites More sharing options...
centro58 Posted June 16, 2016 Share Posted June 16, 2016 This version clutters songs in separate albums. In the normal version Poweramp not pass this, should leave as in the normal version. Link to comment Share on other sites More sharing options...
andrewilley Posted June 16, 2016 Share Posted June 16, 2016 26 minutes ago, centro58 said: This version clutters songs in separate albums. In the normal version Poweramp not pass this, should leave as in the normal version. Sorry, could you explain what you mean in a little more detail. (I've removed your accidental double-post by the way) Andre Link to comment Share on other sites More sharing options...
DS_JohNNy Posted July 2, 2016 Share Posted July 2, 2016 Alpha 703 Sony Xperia Z3 Song: https://www.dropbox.com/s/13ne0gvcvqdsjo7/Melody.mp3?dl=0 Every time I say to the app to play from 00:00 to about minute 1:20 it plays from the begin but it say it's at x minute. Eg: I click at minute 1.11 the music start from the begin but the app says he's playing minute 1.11. It happens with a few of songs. If you don't understand my bad English I will send you a clip. Link to comment Share on other sites More sharing options...
andrewilley Posted July 2, 2016 Share Posted July 2, 2016 3 hours ago, DS_JohNNy said: Every time I say to the app to play from 00:00 to about minute 1:20 it plays from the begin but it say it's at x minute. It's an issue I highlighted a while back, I think it's related to large embedded artwork and/or no properly encoded TOC in the file. I have reported it to Max anyway. [Edit: yes, you've got a 3000x3000 pixel cover art image embedded in the file, which is adding 3.4MB to it] Andre Link to comment Share on other sites More sharing options...
Marv323 Posted July 7, 2016 Share Posted July 7, 2016 well since for me the new gapless is not working with this new Poweramp like the old version worked great for me.. any body else knows other player that play real good seamlessly mixed music.... Link to comment Share on other sites More sharing options...
andrewilley Posted July 7, 2016 Share Posted July 7, 2016 9 hours ago, Marv323 said: well since for me the new gapless is not working with this new Poweramp like the old version worked great for me.. any body else knows other player that play real good seamlessly mixed music.... Gapless works fine for me. Someone a while back mentioned that they had a problem with gapless playback on the alpha builds, but it turned out that their files were not actually gapless anyway but had a short period of silence at the start and finish. I hope Max will put the 'Cut Silence' option back into the Gapless menu before the official release. Andre Link to comment Share on other sites More sharing options...
Antonius Ronald Posted August 31, 2016 Share Posted August 31, 2016 Thanks MaxMP. Works Great. Link to comment Share on other sites More sharing options...
Oriann Posted October 18, 2016 Share Posted October 18, 2016 Everything working perfect. Galaxy S7 edge Link to comment Share on other sites More sharing options...
Djopis Posted November 10, 2016 Share Posted November 10, 2016 Alcatel idol 4 hi res audio failed.... Link to comment Share on other sites More sharing options...
Vimtoman Posted December 3, 2016 Share Posted December 3, 2016 Just trying out the Alpha and It's great thanks. Love the visualisation but I would like to switch it off and have just album art. Sorry Looked everywhere but cant see how to switch it off. Please let me know what needs changing. Link to comment Share on other sites More sharing options...
andrewilley Posted December 3, 2016 Share Posted December 3, 2016 Slide in the panel from the right and tap to change the Visualisation setting (half way down the screen) from 'Normal' to 'Disabled'. Andre Link to comment Share on other sites More sharing options...
Vimtoman Posted December 3, 2016 Share Posted December 3, 2016 Thanks. So obvious but not Maybe show all four options and allow to select one? I think theres enough room Link to comment Share on other sites More sharing options...
andrewilley Posted December 3, 2016 Share Posted December 3, 2016 2 hours ago, Vimtoman said: So obvious but not I know what you mean, it took me a while to work out that the word 'Normal' was actually an on/off switch. Hopefully as part of all the work Max is currently doing on the Material Design interface, controls like this will become easier to find and use. Andre Link to comment Share on other sites More sharing options...
Vimtoman Posted December 22, 2016 Share Posted December 22, 2016 On 03/12/2016 at 5:05 PM, andrewilley said: I know what you mean, it took me a while to work out that the word 'Normal' was actually an on/off switch. Hopefully as part of all the work Max is currently doing on the Material Design interface, controls like this will become easier to find and use. Andre Yep he's done an incredible job. Sounds a billion times better Link to comment Share on other sites More sharing options...
LaplaceD Posted December 23, 2016 Share Posted December 23, 2016 Is it possible to make "playlist" of visualizations to change to my own selections? Link to comment Share on other sites More sharing options...
andrewilley Posted December 24, 2016 Share Posted December 24, 2016 12 hours ago, LaplaceD said: Is it possible to make "playlist" of visualizations to change to my own selections? No, you can choose from the list and temporarily filter (search) it, but you can't set a shortlist version. Andre Link to comment Share on other sites More sharing options...
NetEngine Posted January 10, 2017 Share Posted January 10, 2017 Hello everybody! First of all congratulations for the great apk. I am using it more than 4 years now and its simply amazing! -> However I want to make to point something here and more specific the incompatibility with Huawei Android devices (especially on any additional skin). So my question here is, if it is fixed on the .Alpha Release or hopefully it will be fixed soon???? Thanks in advance for your attention Link to comment Share on other sites More sharing options...
andrewilley Posted January 10, 2017 Share Posted January 10, 2017 2 hours ago, NetEngine said: -> However I want to make to point something here and more specific the incompatibility with Huawei Android devices (especially on any additional skin). Sorry, but the alpha version does not support skins at all. Once v3 is officially released (which will include a new user interface) then the ability to develop and use skins will be included. Andre Link to comment Share on other sites More sharing options...
NetEngine Posted January 11, 2017 Share Posted January 11, 2017 9 hours ago, andrewilley said: Sorry, but the alpha version does not support skins at all. Once v3 is officially released (which will include a new user interface) then the ability to develop and use skins will be included. Andre Dear Andre, Thank so much for your instant response! Yes indeed I have already installed the Alpha release and skin option is disabled . However my main question was, if the final V3 will support skins package installation for Huawei android devices (EMUI 6.0)? because so far V2 does support additional skins installation even the default HD Skins for Poweramp. It seems that is an incompatibility with all the skins packages signatures. Thanks again for your attention and sorry to bother so much with this. Best Regards, NetEngineer Link to comment Share on other sites More sharing options...
andrewilley Posted January 11, 2017 Share Posted January 11, 2017 24 minutes ago, NetEngine said: However my main question was, if the final V3 will support skins package installation for Huawei android devices (EMUI 6.0)? because so far V2 does support additional skins installation even the default HD Skins for Poweramp. It seems that is an incompatibility with all the skins packages signatures. Max did look into this a while back and said it's a problem with Huawei's ROMs which he does not plan to spend time investigating on the old v2 releases. I would hope a workaround will be created in v3 though, especially if this problem occurs on all of one manufacturer's devices with their stock ROMs: Quote - v2 skins (and future v3 skins) works on most devices, but there are always one (or few) ROMs not compatible no matter we do. They just specifically break the part which allows Poweramp (3rd party) skins to work. For v3 certainly compatibility will be better, but again, there will be always some broken ROMs. Andre Link to comment Share on other sites More sharing options...
Yash Jajoo Posted January 11, 2017 Share Posted January 11, 2017 This alpha build isn't compatible with x86 devices? I really want to try it out Link to comment Share on other sites More sharing options...
andrewilley Posted January 11, 2017 Share Posted January 11, 2017 45 minutes ago, Yash Jajoo said: This alpha build isn't compatible with x86 devices? I really want to try it out Correct, there is no special Intel build as yet, and I'm guessing there probably won't be until v3 gets close to RC stage. Andre Link to comment Share on other sites More sharing options...
NetEngine Posted January 14, 2017 Share Posted January 14, 2017 On 11/01/2017 at 10:38 AM, andrewilley said: Max did look into this a while back and said it's a problem with Huawei's ROMs which he does not plan to spend time investigating on the old v2 releases. I would hope a workaround will be created in v3 though, especially if this problem occurs on all of one manufacturer's devices with their stock ROMs: Andre Good morning Dear Andre, Totally understood! thanks for your effort with the above issue. Have a good weekend! Best, NetEngineer Link to comment Share on other sites More sharing options...
stemplar Posted January 30, 2017 Share Posted January 30, 2017 Hi . I have LgV20 me. Android 7.0. Beautiful heather sabre quad DAC and Poweramp.The v3 version is very difficult when looking at new albums with other polyols storage.Why is that ? It's like if you look for a very long time, indicates the albums in the folder view, but when I enter the folder contains no songs.ye have been tested under Android 7.0?During a search, as if the system get stuck, it heats up the CPU at this time.Thank you answer someone. ((I used a year-LGV10 v3 version of me, I did not experience something like that) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.